VPU7029036LK000050

VPU7 High Frequency PECL VCXO September 2007 • Pletronics’ VPU7 Series is a quartz crystal controlled precision square wave generator with a PECL output. • The package is designed for high density surface mount designs. • Low cost mass produced oscillator • • • • 10.9 MHZ to 1,175MHz 5 x 7 mm LCC Ceramic Package Low Jitter RoHS 6/6 Compliant Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.28 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter VCC Supply Voltage Vi Vo IO Input Voltage Output Voltage Output Current Unit -0.5V to +4.6V -0.5V to VCC + 0.5V -0.5V to VCC + 0.5V -50mA Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2007, Pletronics Inc. VPU7 High Frequency PECL VCXO September 2007 Part Number: VPU7029036 EG 000 050 - 312.5M -XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHZ Pullability in ppm (Vcontrol) APR 050 = _ 50 ppm minimum is standard + Series Model Temperature Range EG = -10 to +70oC LK = -40 to +85oC Series Model Part Marking: PLE VPU7 FF.FFF M C YMDXX Marking Legend: PLE = Pletronics FF.FFF M = Frequency in MHZ YMD = Date of Manufacture (year-month-day) All other marking is internal factory codes Codes for Date Code YMD Code Year Code Month Code Day Code Day Code Day 1 1 D 13 T 25 7 2007 A JAN 2 2 E 14 U 26 8 2008 B FEB 3 3 F 15 V 27 9 2009 C MAR 4 4 G 16 W 28 D APR 0 2010 E MAY 5 5 H 17 X 29 1 2011 F JUN 6 6 J 18 Y 30 G JUL 7 7 K 19 Z 31 2 2012 H AUG 8 8 L 20 J SEP 9 9 M 21 K OCT A 10 N 22 L NOV B 11 P 23 M DEC C 12 R 24 www.pletronics.com 425-776-1880 2 VPU7 High Frequency PECL VCXO September 2007 Electrical Specification for 3.30V _10% over the specified temperature range and + the frequency range of 10.9 MHZ to 766 MHZ and 876 MHZ to 1,175MHz Item Pullability, Absolute Pull Range Output Waveform Output High Level 2.12 0.82 -1.18 Output Low Level 1.83 0.53 -1.47 Output Symmetry Modulation Bandwidth Vcontrol Resistance (Pad 1) Voltage vs Frequency Linearity Jitter 47 10 20 -10 Output TRISE and TFALL VCC Supply Current (ICC) Enable/Disable Internal Pull-up V disable V enable Output leakage VOUT = VCC VOUT = 0V Enable time Disable time Start up time Operating Temperature Range 100 50 2.00 -50 -50 -10 - 40 Storage Temperature Range -55 Min -50 Max +50 PECL / ECL 2.49 1.19 -0.81 1.99 0.69 -1.31 53 +10 0.8 3.2 300 110 0.8 +50 +50 10 10 5 +70 +85 +125 volts volts volts volts volts volts % KHz Kohm % pS RMS pS RMS pS mA Kohm volts volts uA uA nS nS mS o o o Unit ppm Condition APR includes the effect of temperature stability, aging, supply voltage and load. Referenced to Ground, VCC = 3.3 V Referenced to termination voltage, VCC = 3.3 V Referenced to Vcc, VCC = 3.3 V Referenced to Ground, VCC = 3.3 V Referenced to termination voltage, VCC = 3.3 V Referenced to Vcc, VCC = 3.3 V at 50% point of VCC (See load circuit) Vcontrol = 1.65V +1.50 V , -3dB _ Vcontrol = 1.65V _ 1.50 V + 12 KHz to 20 MHZ from the output frequency 10 Hz to 20 MHZ from the output frequency Vth is 20% and 80% of waveform to VCC Referenced to pad 3 Referenced to pad 3 Pad 1 low, device disabled Time for output to reach a logic state Time for output to reach a high Z state Time for output to reach specified frequency Standard Temperature Range Extended Temperature Range C C C Specifications with Pad 2 E/D open circuit or connected to VCC www.pletronics.com 425-776-1880 3 VPU7 High Frequency PECL VCXO September 2007 Typical Phase-Noise Response 0 -20 -40 dBc/Hz -60 -80 -100 -120 -140 -160 10 1,000 100,000 10,000,000 100MHz dBc/Hz 400MHz dBc/Hz 1000MHz dBc/Hz Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh 80% 50% 20% Vlow Trise Tfall Out Out* Showing Out Measurement only www.pletronics.com 425-776-1880 4 VPU7 High Frequency PECL VCXO September 2007 Reliability: Environmental Compliance Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition MIL-STD-883 Method 2002, Condition B MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A ESD Rating Model Human Body Model Charged Device Model Minimum Voltage 2000 1500 Conditions MIL-STD-883 Method 3115 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII The part number will be in the PE99 line. Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial www.pletronics.com 425-776-1880 5 VPU7 High Frequency PECL VCXO September 2007 Mechanical: Inches A 6 5 4 1 mm 7.00 +0.15 _ 5.00 +0.15 _ 2.97 max 0.96 5.08 0.10 1.27 1.40 0.60 0.10r 0.20r 2.25 0.25r 0.276 +0.006 _ 0.197 +0.006 _ 0.117 max 0.038 0.200 0.004 0.050 0.055 0.024 0.004r 0.008r 0.089 0.010r Contacts: Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm Center metalized pad on the base is internally connected, may be open or connected to Vcc or to Ground. Do not permit solder to bridge the upper gold contacts on the side. Typical dimensions Not to Scale 1 2 3 B C D1 E1 F1 G 1 H1 I1 J1 K1 L1 M1 Pad 1 2 Function Vcontrol Output Enable/Disable Ground (GND) Output Output* Supply Voltage (VCC) Note Modulates the output frequency When this pad is not connected the oscillator shall operate. When this pad is