0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
PLL502-02HSIR

PLL502-02HSIR

  • 厂商:

    PLL

  • 封装:

  • 描述:

    PLL502-02HSIR - Low Phase Noise VCXO (24MHz to 50MHz) - PhaseLink Corporation

  • 详情介绍
  • 数据手册
  • 价格&库存
PLL502-02HSIR 数据手册
P LL502-02 L ow Phase Noise VCXO (24MHz to 50MHz) F EATURES • • • • • • • • • L ow phase noise VCXO output for the 24MHz to 50MHz range (-130 dBc at 10kHz offset). C MOS output. 1 2 to 25MHz crystal input. I ntegrated variable capacitors. S electable High Drive (30mA) or Standard Drive (10mA) output. W ide pull range (+/- 250 ppm typ.). L ow jitter (RMS): 3ps period (1 sigma). 3 .3V operation. A vailable in 8-Pin SOIC. P IN CONFIGURATION XOUT N/C VCON GND 1 2 3 4 8 7 6 5 XIN N/C VDD CLK PLL502-02 D ESCRIPTION T he PLL502-02 is a low cost, high performance, low phase noise VCXO, providing less than -130dBc at 10kHz offset in the 24MHz to 50MHz operating range. The very low jitter (3 ps RMS period jitter) makes this chip ideal for applications requiring voltage controlled frequency sources. Input crystal can range from 12 to 25MHz (fundamental resonant mode). OUTPUT RANGE M ULTIPLIER x2 FREQUENCY RANGE 24 - 50MHz OUTPUT BUFFER CMOS B LOCK DIAGRAM VCO Divider Reference Divider Phase Comparator Charge Pump Loop Filter VCO CLK XIN XOUT XTAL OSC VARICAP OE VCON 4 7745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 w ww.phaselink.com R ev 12/14/05 Page 1 P LL502-02 L ow Phase Noise VCXO (24MHz to 50MHz) P IN DESCRIPTIONS N ame X OUT N /C V CON G ND C LK V DD X IN Number 1 2,7 3 4 5 6 8 Type I I P O P I Not connected. Voltage Control input. Ground. Output clock. +3.3V power supply. Description Crystal output. See Crystal Specifications on page 3. Crystal input. See Crystal Specifications on page 3. E LECTRICAL SPECIFICATIONS 1 . Absolute Maximum Ratings P ARAMETERS S upply Voltage I nput Voltage, dc O utput Voltage, dc S torage Temperature A mbient Operating Temperature* J unction Temperature L ead Temperature (soldering, 10s) E SD Protection, Human Body Model SYMBOL V DD VI VO TS TA TJ MIN. - 0.5 - 0.5 - 65 - 40 MAX. 4 .6 V DD +0.5 V DD +0.5 150 85 1 25 260 2 UNITS V V V °C °C °C °C kV E xposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above the operational limits noted in this specification is not implied. * N ote : Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only. 2 . DC Specifications P ARAMETERS S upply Current, Dynamic, with Loaded Outputs O perating Voltage O utput drive current (High Drive) O utput drive current (Standard Drive) S hort Circuit Current V CXO Control Voltage VCON 0 SYMBOL I DD V DD I OH I OL I OH I OL CONDITIONS F XIN = 1 2 - 25MHz Output load of 10pF MIN. TYP. 16 MAX. 20 3.63 UNITS mA V mA mA mA mA 2 .97 V OH = V DD -0.4V, V DD =3.3V V OL = 0 .4V, V DD = 3 .3V V OH = V DD -0.4V, V DD =3.3V V OL = 0 .4V, V DD = 3 .3V 30 30 10 10 ± 50 mA 3.3 V 4 7745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 w ww.phaselink.com R ev 12/14/05 Page 2 P LL502-02 L ow Phase Noise VCXO (24MHz to 50MHz) 3 . AC Electrical Specifications P ARAMETERS I nput Crystal Frequency O utput Clock Rise/Fall Time (Standard Drive) O utput Clock Rise/Fall Time (High Drive) O utput Clock Duty Cycle 0 .3V ~ 3.0V with 15 pF load 0 .3V ~ 3.0V with 15 pF load M easured @ 50% V DD 45 SYMBOL CONDITIONS MIN. 12 TYP. MAX. 25 UNITS MHz 2.4 ns 1.2 50 55 % 4 . Voltage Control Crystal Oscillator P ARAMETERS V CXO Stabilization Time * V CXO Tuning Range C LK output pullability V CXO Tuning Characteristic P ull range linearity V CON pin input impedance V CON modulation BW SYMBOL T VCXOSTB CONDITIONS F rom power valid F XIN = 1 2 – 25MHz; XTAL C 0 /C 1 < 2 50 0V ≤ V CON ≤ 3 .3V VCON=1.65V, ± 1.65V MIN. TYP. MAX. 10 UNITS ms ppm ppm ppm/V % kΩ kHz 500 ± 200 1 65 10 2 000 25 0 V ≤ V CON ≤ 3 .3V, -3dB N ote: P arameters denoted with an asterisk (*) represent nominal characterization data and are not production tested to any specific limits. 5 . Jitter and Phase Noise Specification P ARAMETERS R MS Period Jitter (1 sigma – 1000 samples) P hase Noise relative to carrier P hase Noise relative to carrier P hase Noise relative to carrier P hase Noise relative to carrier P hase Noise relative to carrier CONDITIONS at 44MHz, with capacitive decoupling between VDD and GND. 44MHz @100Hz offset 44MHz @1kHz offset 44MHz @10kHz offset 44MHz @100kHz offset 44MHz @1MHz offset MIN. TYP. 3 -100 -123 -130 -125 -125 MAX. UNITS ps dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 6 . Crystal Specifications P ARAMETERS C rystal Resonator Frequency C rystal Loading Capacitance Rating C 0/C1 E SR SYMBOL F XIN C L (xtal) RS MIN. 12 TYP. 9 .5 MAX. 25 250 30 UNITS MHz pF Ω N ote : Crystal Loading rating: 9.5pF is the loading the crystal sees from the VCXO chip at VCON = 1.65V. It is assumed that the crystal will be at nominal frequency at this load. If the crystal requires more load to be at nominal frequency, the additional load must be added externally. This however may reduce the pull range. 4 7745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 w ww.phaselink.com R ev 12/14/05 Page 3 P LL502-02 L ow Phase Noise VCXO (24MHz to 50MHz) P ACKAGE INFORMATION 8 PIN SOIC (in mm) Symbol A A1 B C D E H L e Min. Max. 1.47 1.73 0.10 0.25 0.33 0.51 0.19 0.25 4.80 4.95 3.80 4.00 5.80 6.20 0.38 1.27 1.27 BSC E H D A A1 e B C L O RDERING INFORMATION F or part ordering, please contact our Sales Department: 4 7745 Fremont Blvd., Fremont, CA 94538, USA Tel: (510) 492-0990 Fax: (510) 492-0991 P ART NUMBER T he order number for this device is a combination of the following: Device number, Package type and Operating temperature range P LL502-02 H S C X X P ART NUMBER O p tional Hi g h Drive P ACKAGE TYPE S=SOIC N ONE= TUBE R=TAPE AND REEL NONE=NORMAL PACKAGE L=GREEN PACKAGE T EMPERATURE C=COMMERCIAL, I=INDUSTRIAL O rder Number PLL502-02SC PLL502-02SC-R PLL502-02SCL PLL502-02SCL-R PLL502-02HSC PLL502-02HSC-R PLL502-02HSCL PLL502-02HSCL-R Marking P502-02SC P502-02SC P502-02SCL P502-02SCL P502-02HSC P502-02HSC P502-02HSCL P502-02HSCL Package Option SOIC - Tube SOIC - Tape and Reel SOIC – Tube, GREEN SOIC - Tape and Reel, GREEN SOIC - Tube SOIC - Tape and Reel SOIC – Tube, GREEN SOIC - Tape and Reel, GREEN P haseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product. L IFE SUPPORT POLICY : PhaseLink’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of PhaseLink Corporation. 4 7745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 w ww.phaselink.com R ev 12/14/05 Page 4
PLL502-02HSIR
1. 物料型号: - 型号:PLL502-02 - 描述:低相位噪声压控晶体振荡器(VCXO),工作频率范围为24MHz至50MHz。

2. 器件简介: - PLL502-02是一款低成本、高性能的低相位噪声VCXO,提供24MHz至50MHz范围内小于-130dBc的相位噪声(在10kHz偏移处)。具有非常低的抖动(3ps RMS周期抖动),适用于需要电压控制频率源的应用。输入晶体频率范围为12至25MHz(基本共振模式)。

3. 引脚分配: - XOUT(1号引脚):晶体输出。 - N/C(2号和7号引脚):未连接。 - VCON(3号引脚):电压控制输入。 - GND(4号引脚):地。 - CLK(5号引脚):输出时钟。 - VDD(6号引脚):+3.3V电源。 - XIN(8号引脚):晶体输入。

4. 参数特性: - 工作电压:3.3V。 - 动态供电电流:16至20mA。 - 高驱动输出驱动电流:30mA。 - 标准驱动输出驱动电流:10mA。 - VCXO控制电压:0至3.3V。

5. 功能详解: - PLL502-02提供小于-130dBc的相位噪声(在10kHz偏移处),具有500ppm的VCXO调谐范围和165ppm/V的VCXO调谐特性。此外,还具有2000kΩ的VCON引脚输入阻抗和25kHz的VCON调制带宽。

6. 应用信息: - 适用于需要电压控制频率源的应用,例如通信系统和频率合成器。

7. 封装信息: - 8引脚SOIC封装,具体尺寸参数在PDF中有详细描述。
PLL502-02HSIR 价格&库存

很抱歉,暂时无法提供与“PLL502-02HSIR”相匹配的价格&库存,您可以联系我们找货

免费人工找货