PCI6350-AA66PCG

. Version 1.0 2005 Connectivity PCI r3.0 compatible 3.3V signaling including 5V input signal tolerance 32-bit, 66MHz Asynchronous operation Support for 9 Bus Masters PQFP and BGA packages PCI 6350 Asynchronous 32-bit PCI–to–PCI Bridge High Performance Asynchronous 32-bit, 66MHz, PCI–to–PCI Bridge for Cost-sensitive Applications The PLX FastLane™ PCI 6350 is an asynchronous, 32-bit, 66MHz PCI-to-PCI bridge for enhanced costeffective bridging for add-in cards in image processing, video capture, PCI I/O expansion, storage or network servers, telecommunication, networking, and embedded applications. And, like all PLX interconnect chips, the PLX PCI 6350 is supported by best-of-class, comprehensive reference design tools, along with PLX’s industry-recognized support infrastructure. The PCI 6350 is designed for applications such bus load /PCI slot expansion, and frequency conversion from slower PCI to faster PCI buses or vice versa, using Asynchronous bridging. Asynchronous bridging is a key feature of the PCI 6350, in which the primary and secondary buses can operate at independent frequencies. In addition, the PCI 6350 includes sophisticated buffer management and buffer configuration options designed to provide customizable performance optimization. All of this is in an industry-standard pin-out, which is compatible with the PCI 6150 and 21150-type devices. The PCI 6350 is available in both PQFP and BGA packages with a lead-free ROHS compliant option. Performance Flow-Thru zero wait state burst up to 4 KB for optimal large volume data transfer 192 buffering bytes (data FIFO) Two-entry 64-byte upstream Posted Write buffer Two-entry 32-byte downstream Posted Write buffer Two-entry 64-byte upstream Read Data buffer One-entry 32-byte downstream Read Data buffer Out-of-order delayed transactions Serial EEPROM loadable and programmable PCI Read-Only register configurations External arbiter or programmable arbitration for nine bus masters on secondary interface support Ten secondary clock outputs with pin controlled enable and individual maskable control Four GPIO pins with output control and power-up status latch capable Enhanced address decoding 32-bit I/O Address range ISA Aware mode for legacy support in the first 64 KB of I/O Address range VGA addressing and palette snooping support IEEE Standard 1149.1-1990 JTAG interface for boundary scan test Industry-standard 208-pin (ball) Plastic Quad Flat Pack (PQFP) or 256-pin (ball) Plastic Ball Grid Array (PBGA) package Address Stepping hardcoded to two clocks Multiple IDs check all Device and Revision IDs ISA I/O—Added decode of legacy ISA devices Added optional flow-through enable Fast back-to-back enable—Read-only supported Figure 1. Asynchronous PCI Bridging Figure 2. Bus Load Expansion Example Product Ordering Information PLX Technology, Inc. 870 Maude Ave. Sunnyvale, CA 94085 USA Tel: 1-800-759-3735 Tel: 1-408-774-9060 Fax: 1-408-774-2169 Email: info@plxtech.com Web Site: www.plxtech.com Part Number PCI 6350-AA66PC PCI 6350-AA66PC G PCI 6350-AA66BC PCI 6350-AA66BC G PCI 6350RDK Description PCI 6350 PCI-to-PCI Bridge Chip (PQFP) PCI 6350 PCI-to-PCI Bridge Chip (PQFP) (Lead Free) PCI 6350 PCI-toPCI Bridge Chip (BGA) PCI 6350 PCI-toPCI Bridge Chip (BGA) (Lead Free) Flexible development platform for PCI 6350-based PCI-to-PCI Bridging designs. Please visit the PLX Web site at http://www.plxtech.com or contact PLX sales at 408-774-9060 for more information. © 2005 PLX Technology, Inc. All rights reserved. PLX, FastLane, and the PLX logo are registered trademarks of PLX Technology, Inc. All other product names that appear in this material are for identification purposes only and are acknowledged to be trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and reliable, but PLX Technology, Inc. assumes no responsibility for any errors that may appear in this material. PLX Technology, Inc. reserves the right, without notice, to make changes in product design or specification. 6350-SIL-PB-P1-1.0 3/05 200