1330-0

Model 1330 Double Banana Plug with Component Mounting Area Model 1330 Double Banana Plug with Component Mounting Area Features Specifications • Operating Voltage: Hands free usage in controlled voltage environments: 5000 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. Operating Temperature: +50°C (+122°F) Max. Current: 15 Amperes • • Features a recessed area for mounting small discrete components with set screws. For test versatility, banana plugs can be vertically and horizontally stacked to the adapter. The banana plug features nickel plated beryllium copper for tarnish resistance & long insertion life. Materials Banana Plugs/Jacks: Body: Brass, Nickel Plated Spring: Beryllium Copper, Nickel Plated Insulation: Material: Polypropylene molded to Banana Jack and Banana Plug bodies. Marking: “1330, POMONA ELECTRONICS CO., INC, POMONA CALIFORNIA” Set Screws: #8-32 Single Slot, Steel, Zinc Plated USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com Ordering Information Model: 1330-* *=Color, Standard Colors: -0 (Black), -2 (Red) Ordering Example: 1330-2 (Color is Red) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2010 D1093605 Rev. 100 Page 1 of 1