4236A

Pomona DIP CLIPS 8 through 40 pins and 8 through 40 pin DIP Removers ® ITT Pomona DIP Clip® test clips are designed for testing dual-in-line IC packages on PC boards. These devices incorporate many built-in features that assure a positive electrical connection as well as hands free testing. n Contacts (.040" wide on lower end) are serrated for the best electrical contact. n .025" X .028" serrated test points on upper end will accept wire wraps or mini test clips. n Molded barriers between contacts allows live board connections without accidental shorting of contacts. n Can also be used as an insertion tool for DIPs. n Contacts are spring tempered Nickel Silver or Gold Plated Beryllium Copper alloy. Oxide penetrating clips have a roughened stainless steel surface treatment. n Open back option allows probing on the chip leads while clip is attached. Pomona's DIP Clip® test clips are perfect for emulation, field service, failure analysis, and for use with logic analyzers. Size Pins Clip Width Standard Open Back DIP DIP Clip® Clip® Contact Material and Plating Oxide Penetrating DIP Clip® Static Control DIP Remover 8 .43 5108 5208 Be-Cu, Gold Plate 5649 5016 14 .72 5014 5114 Nickel Silver 5650 5016 5214 5314 Be-Cu, Gold Plate 5650 5016 3916A 4236A Nickel Silver 5692 5016 5116 5216 Be-Cu, Gold Plate 5692 5016 16 .83 20 1.03 5120 5220 Be-Cu, Gold Plate 5693 5016 24 1.22 4124A 4324A Nickel Silver 5694 5024 5124 5224 Be-Cu, Gold Plate 5694 5024 4140A 4340A Nickel Silver 5695 5040 5140 5240 Be-Cu, Gold Plate 5695 5040 40 2.02 Made in USA dips.doc REV A Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 PomonaACCESS 90220 (800) 444-6785 or (714) 253-3858 More drawings available at www.ittpomona.com