4772

Pomona ® Model 4772 Square Pin Receptacle To 2.0 (.080) Pin Tip Plug FEATURES: This patch cord can be used as a jumper between 0.6 (.025) sq. pins and equipment with 2.0 (.080) dia. pin jacks. MATERIALS: Conn: Pin Tip Plug Material: Brass per QQ-B-626, Alloy 360, ½ Hard. Finish: Gold plated per MIL-G-45204, Type II, Class 00, over electroless nickel per MIL-C-26074, Class 1, (.0002/.0003). Insulation: Polypropylene molded to plug body and wire. Color: Matches color of wire. Marking: POMONA ELECTRONICS POMONA CALIF. Wire: 22 AWG, stranded, 19 x 34 T.C., PVC insulated, 1.63 (.064) O.D. Color: See Ordering Information. Marking: POMONA 4772-XX Conn: .64 (.025) Square Pin Receptacle Material: Phosphor Bronze. Finish: Gold Plated Housing Insulation: Polypropylene Color: Black. RATINGS: Entire Assembly Operating Temperature: +50ºC. (+122ºF.) Max. Operating Voltage: 1000 W VDC Current: 3 Amperes Cont. ORDERING INFORMATION: Model 4772-XX-* XX = Cable Lengths, Standard Lengths: 24 (610) Additional lengths can be quoted upon request. *=Color, -0 Black, -2 Red Ordering Example: 4772-24-2 Indicates 24 in length, color is Red All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm), .xxx = ± .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS W:\pomona\grponly\Datasheet Updates\Updates 2005\d4772_1_02.doc More drawings available at www.pomonaelectronics.com Page 1 of 1