5325A

Model 5325A DMM Test Probe to Multi-Stacking Banana Plug Kit FEATURES        USA: Fits Fluke, H-P, Tektronix Wavetek and Amprobe meters configured with non-sheathed standard and 4 mm banana jacks. Test probe & banana plug bodies are molded directly to a flexible 48" (122 cm) high strand count/high temperature silicone leads for added pull strength, overall probe length 4.85" (12,3 cm). Wear indication with double insulated (dual extruded) silicone leads shows white inner layer for increased safety. Nickel plated brass tip offers high conductivity for precision measurements. Medium alligators are insulated for added safety and can quickly snap onto the .080” (2,03 mm) O.D. probe tip. Medium alligators have an overall length of 2.25” (5.7 cm) and grip up to 0.30” (7.62 mm) O.D. terminals. Slide-on extended tips have an overall length of 4” (10.16 cm) & attaches to the probe tip to allow access to hard to reach test points. The Extended Tip is insulated to the point to prevent accidental shorting. Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1094373 Rev. 100 Page 1 of 2 Model 5325A DMM Test Probe To Multi-Stacking Banana Plug Kit MATERIALS Model 5309A: Test Probe Set: Probe body: Polypropylene, Fire Retardant – Santoprene® overmold., Tip: Brass Wire: 18 AWG, 192 x 41 bare copper, Silicone Insulation, O.D. 0.144” (3,66mm). Length: 48" (122cm) Banana Plug: Insulation: Polypropylene – Plug Body: Brass Nickel Plated, Spring: Beryllium Copper, Nickel Plated RATINGS: Operating Voltage: For CE compliance and personal safety, do not hold in hand when voltages exceed 30 Vrms/42.4 Vpk/60 Vdc or current exceeds 8A maximum. Maximum voltage for hands free use: 1000 V. Do not use on circuits where transient stresses can exceed the rated voltage. Current: 10 Amperes Model 6262: Slide-on Extended Tip: Insulation – Polypropylene UL94 V-2, Color: one black and one red Probe Tip: Stainless Steel with Kynar Insulation Sleeve to Tip End RATINGS: CAT II 300 V, Current: 3 Amperes Model 6264: Alligator Adapter: Insulation: Polypropylene, Color: One Black, One Red Body: Steel, Nickel Plated, Spring: Music Wire RATINGS: CAT I 300 V, Current: 5 Amperes Ordering Information: Model 5325A Kit shipped in a plastic blister package. Replacement P/N's:  Model 5309A: Test Probes, set of one black and one red  Model 6262: Slide-on Extended Tip, set of one black and one red  Model 6264: Alligator Adapter, set of one black and one red. USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1094373 Rev. 100 Page 2 of 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pomona: 5325A