6303

Model 6303 4-Wire Kelvin Probe Set with Double Banana Plug Leads FEATURES: Kelvin probe configuration reduces the voltage drop in test leads, minimizing measurement inaccuracies, making them excellent for low resistance measurements. Single probe tip is ideal for testing surface mount and small components. Probe tips and banana plugs are gold plated Beryllium Copper for low contact resistance. Shielded coaxial cable reduces electrostatic interference. Probe overmolded with Santoprene® rubber for handling comfort, added insulation protection and cable strain relief. Compatible with 4-wire test instruments with .75” (19,05mm) spacing between”Source” and “Sense” terminals. MATERIALS: Probe Body: Outer Insulation- Gray Santoprene® Rubber Inner Insulation- Polypropylene, One Black, One Red Tip- Gold plated Beryllium Copper Banana Plug: Body- Gold Plated Brass Spring- Beryllium Copper, Gold Plated Insulation- Polypropylene, Color: One Black, One Red Cable: RG174/U Length: 48” (122cm), O.D. 0.100 (2,54mm) RATINGS: For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. ORDERING INFORMATION: Model 6303 (includes a set of one black and one red test lead) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (technicalsupport@pomonatest.com) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094689 Page 1 of 1