6703A

Pomona ® Model 6703A HDTV, 75 Ohm BNC Connector for RG-6/U Features: Connectors are precision machined (not die-cast) from brass. Black nickel plating is applied for easily identification as a high definition connector. Insulator material is high density PTFE to maintain a perfect dielectric constant. Connectors utilize gold plated contact pin to maintain low return loss in high definition applications. Connector is precision matched to Belden ® 1694A cable, a precision low loss serial digital video RG-6/U coax cable. video coax for analog and digital SDI/HDTV applications Connectors use standard commercial die set, size: 0.324"/0.255"/0.068" HEX and 0.052"/0.042" SQ (e.g. model 2657 or 2699 from Paladin Tools) Materials: Connector Body Crimp Ferrule Outer Contact Male Contact Pin Insulator Black nickel plated brass Nickel plated annealed copper Nickel plated brass Gold plated brass Polytetrafluorethylene (PTFE) 75 ohms 0 to 3 GHz. 1.3 max 0.2 db (@ 3GHz.) -55 db (@ 3GHz.) 3 Milliohms *500 V 5,000 Megohms 500 min. 60 lbs. -55 to +199° C Ratings: Impedance: Frequency: VSWR: Insertion Loss: Leakage Loss: Contact Resistance: Voltage Insulation Resistance: Insertions: Cable Retention: Temperature: *Hands free testing in controlled voltage environment; For CE compliance: not intended for hand held use at voltages above 33Vms/70 Vdc All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA Sales: 800-490-2361 Fax: 425-446-5844 Technical Assistance: technicalsupport@pomonatest.com For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 005 D1099634 Page 1 of Pomona ® Model 6703A HDTV, 75 Ohm BNC Connector for RG-6/U Use standard commercial die set, size: 0.324"/0.255"/0.068" HEX and 0.052"/0.042" SQ (e.g. model 2657 or 2699 from Paladin Tools) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA Sales: 800-490-2361 Fax: 425-446-5844 Technical Assistance: technicalsupport@pomonatest.com For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 005 D1099634 Page 2 of