6729-0

Model 6729 Do-It-Yourself Right-Angle Sheath Banana Plug Features • • • • • Fits standard banana safety-style jacks. Fits DMM with safety-style banana jacks. Simple assembly. Complies with International Safety Standard IEC 61010-2-031. Accepts 18 AWG test lead wire (e.g. Pomona model: 6733 or 6734). Materials Banana Jack: Banana Plug: Insulation: Nickel Plated Brass Nickel Plated Beryllium Copper Lucel Acetal Polymer Materials Voltage / Current: Temperature: * 1000 Vrms, CAT III, 20 A, IEC 61010-2-031 -10ºC to +55ºC Ordering Information 6729-0 6729-2 Black, Do-It-Yourself Right-Angle Sheath Banana Plug Red, Do-It-Yourself Right-Angle Sheath Banana Plug * When plug is correctly assembled and terminated. USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2010 D1099695 Rev. 002 Page 1 of 3 Model 6729 Do-It-Yourself Right-Angle Sheath Banana Plug USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2010 D1099695 Rev. 002 Page 2 of 3 Model 6729 Do-It-Yourself Right-Angle Sheath Banana Plug USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2010 D1099695 Rev. 002 Page 3 of 3