72984

Model 72984 SMB JACK STRAIGHT CRIMP, RG174, 188, 316 Model 72984 SMB JACK STRAIGHT CRIMP, RG174, 188, 316 Snap-on coupling and small size for fast connect and disconnect. Features • • • • • • • • • DC - 3 GHz bandwidth. Meets MIL-C-39012, IEC 60169-1Q, BS9210N0007, NFC93650, CECC 22130. Small size and durability for RF coaxial applications. Precision machined and gold-plated for low loss. Body is machined brass with gold plating. Center contacts – Plug is gold plated brass and Jack is gold plated beryllium copper. High quality PTFE insulators. Crimp Ferrules are nickel plated copper. Silicone rubber gaskets. Specifications Impedance Frequency Range VSWR Working Voltage Dielectric withstand voltage Center / Outer contact resistance Number of insertions Insulation resistance Temperature Range 50 Ω DC - 3 GHz 1.4 max. 250 Vrms max. 750 Vrms 6 / 1 mΩ 500 cycles min. 1,000 MΩ min. -65˚ C to 165˚ C, -85˚ F to 329˚ F Materials Ordering Information Model: 72984 Description: SMB JACK STRAIGHT CRIMP, RG174, 188, 316 USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003424 REV 001 Copyright © 2007 10/19/2007 Page 1 of 2 Model 72984 SMB JACK STRAIGHT CRIMP, RG174, 188, 316 Cable Types and Crimp Die Information Connector Model # 72984 Crimp Die Cavity Size for Outer Ferrule RG174, 188, 316 Crimp Die Cavity Size for Outer Ferrule .128 (3.3) Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003424 REV 001 Copyright © 2007 10/19/2007 Page 2 of 2