73002

Model 73002 MCX PLUG STRAIGHT CRIMP, RG174, 316 Model 73002 MCX PLUG STRAIGHT CRIMP, RG174, 316 Snap-on coupling and miniature size for fast connect and disconnect where space is limited. Features • • • • • DC - 3 GHz bandwidth. 30% smaller than SMB connectors. Meets CECC 22220. Perfect for applications where space, weight, performance and ease of assembly are required. Precision machined and gold-plated for low loss. Frequency Range VSWR Working Voltage DC - 3 GHz 1.4 max. 170 Vrms max. 750 Vrms 5 / 2.5 mΩ 500 cycles min. 1,000 MΩ min. -55˚ C to 155˚ C, -67˚ F to 311˚ F Specifications Impedance 50 Ω Materials • • • • Body is machined brass with gold plating. Center contacts – Plug is gold plated brass and Jack is gold plated beryllium copper. High quality PTFE insulators. Crimp Ferrules are gold or nickel plated copper. Dielectric withstand voltage Center / Outer contact resistance Number of insertions Insulation resistance Ordering Information Model: 73002 Description: MCX PLUG STRAIGHT CRIMP, RG174, 316 USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com Temperature Range All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003439 REV 001 Copyright © 2007 11/25/2007 Page 1 of 2 Model 73002 MCX PLUG STRAIGHT CRIMP, RG174, 316 Cable Types and Crimp Die Information Connector Model # 73002 Cable Groups Crimp Die Cavity Size for Outer Ferrule .128 (3.3) RG174, 316 Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003439 REV 001 Copyright © 2007 11/25/2007 Page 2 of 2