73014

Model 73014 MCX PLUG STRAIGHT SEMI-RIGID, RG402 Model 73014 MCX PLUG STRAIGHT SEMI-RIGID, RG402 Snap-on coupling and miniature size for fast connect and disconnect where space is limited. Features Specifications • DC - 3 GHz bandwidth. • 30% smaller than SMB connectors. Impedance 50 Ω • Meets CECC 22220. Frequency Range DC - 3 GHz • Perfect for applications where space, weight, performance and ease of assembly are required. VSWR 1.35 max. Working Voltage 170 Vrms max. Dielectric withstand voltage 750 Vrms Center / Outer contact resistance 5 / 2.5 mΩ Number of insertions 500 cycles min. Insulation resistance 1,000 MΩ min. Temperature Range -55˚ C to 155˚ C, -67˚ F to 311˚ F • Precision machined and gold-plated for low loss. Materials • • • • Body is machined brass with gold plating. Center contacts – Plug is gold plated brass and Jack is gold plated beryllium copper. High quality PTFE insulators. Crimp Ferrules are gold or nickel plated copper. Ordering Information Model: 73014 Description: MCX PLUG STRAIGHT SEMI-RIGID, RG402 USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003450 REV 001 Copyright © 2007 11/25/2007 Page 1 of 2 Model 73014 MCX PLUG STRAIGHT SEMI-RIGID, RG402 Cable Types and Crimp Die Information Connector Model # Cable Groups Crimp Die Cavity Size for Outer Ferrule 73014 RG402 .151 (3.8) Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003450 REV 001 Copyright © 2007 11/25/2007 Page 2 of 2