0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
73049

73049

  • 厂商:

    POMONA

  • 封装:

    -

  • 描述:

    CONN N PLUG R/A 50 OHM

  • 数据手册
  • 价格&库存
73049 数据手册
Model 73049 N Type Right-Angle Plug, 50 Ohm, Crimp Type, RG 55, 142 Model 73049 N Type Right-Angle Plug, 50 Ohm, Crimp Type, RG 55, 142 Features     DC – 6GHz bandwidth. Connectors are precision machined. Meets interface requirements MIL-C-39012. Connector accepts cable types RG/U: 55, 142 Materials Center Conductor, Male: Brass, Gold Plated Connector Body: Brass, Nickel Plated Crimp Ferrule: Copper, Nickel Plated Insulators: PTFE Gasket: Silicone Rubber Specifications Impedance: 50Ω Frequency Range: DC – 6GHz Contact Resistance: Center Conductor: ≤1.0 mΩ Outer Conductor: ≤0.2 mΩ Insulation Reistance: ≥ 5000 MΩ Dielectric Withstand Voltage: 1500V For CE compliance, do not hold in hand when voltages exceed 33 Vrms / 70 Vdc. VSWR: ≤1.5 Number of Insertions: 500 cycles minimum Ordering Information Model: 73049 USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2015 D2018789 Rev. 004 Page 1 of 2 Model 73049 N Type Right-Angle Plug, 50 Ohm, Crimp Type, RG 55, 142 Cable Types and Crimp Die Information Connector Model # 73049 Cable Groups RG 55, 142 Crimp Die Cavity Size for Outer Ferrule .230 (5.9) Cable Assembly Instructions 8. SLIDE AND SCREW NUT. SLIDE SHRINK TUBING OVER CRIMP AND SHRINK USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2015 D2018789 Rev. 004 Page 2 of 2
73049 价格&库存

很抱歉,暂时无法提供与“73049”相匹配的价格&库存,您可以联系我们找货

免费人工找货