73056

Model 73056 TNC Plug, 50 Ohm, Crimp Type, RG58, 141 CRIMP FERRULE Materials Center Conductor, Male: Brass, Gold Plated Connector Body: Brass, Nickel Plated Crimp Ferrule: Brass, Nickel Plated Insulators: PTFE Specifications Impedance: 50Ω Frequency Range: DC – 11GHz Contact Resistance: Center Conductor: ≤1.5 mΩ Outer Conductor: ≤0.2 mΩ Insulation Reistance: ≥ 5000 MΩ Dielectric Withstand Voltage: 1500V For CE compliance, do not hold in hand when voltages exceed 33 Vrms / 70 Vdc. Number of Insertions: 500 cycles minimum Model 73056 TNC Plug, 50 Ohm, Crimp Type, RG58, 141 Features • • • • DC – 11GHz bandwidth. Connectors are precision machined. Meets interface requirements MIL-C-39012. Connector accepts cable types RG/U: 58, 141 Ordering Information Model: 73056 Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com USA: All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D2018805 Rev. 001 Page 1 of 2 Model 73056 TNC Plug, 50 Ohm, Crimp Type, RG58, 141 Cable Types and Crimp Die Information Connector Model # 73056 Cable Groups RG58, 141 Crimp Die Cavity Size for Outer Ferrule .213 (5.4) Cable Assembly Instructions Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com USA: All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D2018805 Rev. 001 Page 2 of 2