PO74G304ATR

PO74G304A 3.3V 1:4 CMOS Clock Buffered Driver 700MHz TTL/CMOS Potato Chip 07/31/06 FEATURES: • Patented technology • Operating frequency up to 700MHz with 2pf load • Operating frequency up to 650MHz with 5pf load • Operating frequency up to 450MHz with 15pf load • Operating frequency up to 100MHz with 50pf load • Very low output pin to pin skew < 100ps Max • Very low pulse skew < 150ps Max • VCC = 1.65V to 3.6V • Propagation delay < 2.0ns max with 15pf load • Low input capacitance: 3pf typical • 1:4 fanout • Packaging (Pb-free & Green available) • Available in 8-pin TSSOP package DESCRIPTION: Potato Semiconductor’s PO74G304A is designed for world top performance using submicron CMOS technology to achieve 700MHz TTL output frequency with less than 100ps output pin to pin skew. PO74G304A is a 3.3V CMOS 1 input to 4 outputs Buffered driver to achieve 700MHz output frequency. Typical applications are clock and signal distribution. They are used for networking and communications applications. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V/5V system environment. Pin Configuration Logic Block Diagram Y0 CLK_IN OE Y0 GND 1 2 3 4 8 7 6 5 Y3 Y2 VDD Y1 OE CLK_IN Y3 Y1 Y2 Pin Description Pin# 1 2 3,5,7,8 4 6 De s cription 5V Tolerant clock input Active High Output Enable. LVCMOS level outputs Groun 3.3V powe FUNCTION TABLE INPUTS CLKIN OE OUTPUT 1Y (0:3) L H L H L L H H L L L H 1 Copyright © 2005-2006, Potato Semiconductor Corporation PO74G304A 3.3V 1:4 CMOS Clock Buffered Driver 700MHz TTL/CMOS Potato Chip 07/31/06 Maximum Ratings Description Storage Temperature Operation Temperature Operation Voltage Input Voltage Output Voltage Max -65 to 150 -40 to 85 -0.5 to +4.6 -0.5 to +5.5 -0.5 to Vcc+0.5 Unit °C °C V V V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description Output High voltage Output Low voltage Input High voltage Input Low voltage Input High current Input Low current Clamp diode voltage Test Conditions Vcc=3V Vin=VIH or VIL, IOH= -12mA Vcc=3V Vin=VIH or VIL, IOH=12mA Guaranteed Logic HIGH Level (Input Pin) Guaranteed Logic LOW Level (Input Pin) Vcc = 3.6V and Vin = 5.5V Vcc = 3.6V and Vin = 0V Vcc = Min. And IIN = -18mA Min Typ M ax Unit VOH VOL VIH VIL IIH IIL VIK Notes: 1. 2. 3. 4. 5. 2.4 2 -0.5 - 3 0.4 -0.7 0.5 5.5 0.8 50 -50 -1.2 V V V V uA uA V For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25 ° C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current 2 Copyright © 2005-2006, Potato Semiconductor Corporation PO74G304A 3.3V 1:4 CMOS Clock Buffered Driver 700MHz TTL/CMOS Potato Chip 0 7/31/06 Power Supply Characteristics Symbol Description Quiescent Power Supply Current Test Conditions (1) Vcc=Max, Vin=Vcc or GND M in Typ M ax Unit IccQ Notes: 1. 2. 3. 4. - 0.1 30 uA For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25° C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. Capacitance Parameters (1) Description Input Capacitance Output Capacitance Test Conditions Vin = 0V Vout = 0V Typ M ax Unit Cin Cout Notes: 3 - 4 6 pF pF 1 This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol Description Propagation Delay A to Bn Propagation Delay A to Bn Rise/Fall Time Pulse Skew (Same Package) Output Pin to Pin Skew (Same Package) Output Skew (Different Package) Input Frequency Input Frequency Input Frequency Input Frequency Test Conditions (1) CL = 15pF CL = 15pF 0.8V – 2.0V CL = 15pF, 125MHz CL = 15pF, 125MHz CL = 15pF, 125MHz CL = 5 0 p F CL =15pF CL = 5pF CL = 2pF M ax Unit tPLH tPHL tr/tf tsk(p) tsk(o) tsk(pp) fmax fmax fmax fmax Notes: 2.0 2.0 0.8 150 100 400 100 450 650 700 ns ns ns ps ps ps MHz MHz MHz MHz 1. See test circuits and waveforms. 2. tpLH, tpHL, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested. 3. Airflow of 1m/s is recommended for frequencies above 133MHz 3 Copyright © 2005-2006, Potato Semiconductor Corporation PO74G304A 3.3V 1:4 CMOS Clock Buffered Driver 700MHz TTL/CMOS Potato Chip 07/31/06 Test Waveforms Test Circuit 50Ω 4 Copyright © 2005-2006, Potato Semiconductor Corporation PO74G304A 3.3V 1:4 CMOS Clock Buffered Driver 700MHz TTL/CMOS Potato Chip 0 7/31/06 Packaging Mechanical Drawing: 8 pin TSSOP 8 SEATING PLANE X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS 5 Copyright © 2005-2006, Potato Semiconductor Corporation PO74G304A 3.3V 1:4 CMOS Clock Buffered Driver 700MHz TTL/CMOS Potato Chip 0 2/12/08 Ordering Information Ordering Code PO74G304ATU PO74G304ATR 8pin TSSOP 8pin TSSOP Package Tube Tape and reel Pb-free & Green Pb-free & Green Top-Marking PO74G304AT PO74G304AT TA -40°C to 85°C -40°C to 85°C IC Package Information PACKAGE CODE PACKAGE TYPE TAPE WIDTH (mm) TAPE PITCH (mm) PIN 1 LOCATION TAPE TRAILER LENGTH QTY PER REEL TAPE LEADER LENGTH QTY PER TUBE T TSSOP 8 12 8 Top Left Corner 39 (12”) 3000 64 (20”) 158 6 Copyright © 2005-2006, Potato Semiconductor Corporation