0602R5001-33

Type 3SB Slow Blow Fuse Series 3SB Series, 6x32mm Glass Tube Slow Blow Fuse RoHS Compliant Description 6x32mm Slow Blow, glass tube body cartridge fuse designed, approved and complied with UL and CSA standard 248-14. Features - Meet UL and CSA standard 248-14 - Wide operating temperature range - Bulk packing available - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free - Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Glass Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : Marking “bel”, “3SB”, “Current Rating”, “Voltage Rating”, ”Appropriate Safety Logos”, ”  ”（ RoHS compliant） On Label : "bel", "3SB”, "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " Electrical Characteristics (UL/CSA STD,248-14) Blow Time Testing Current Minimum Maximum 100% 4 hrs. N/A 135% N/A 1 Hr 200% 5 sec 30 sec ", " "(China RoHS compliant). Safety Agency Approvals Safety Agency Safety Agency Certificate E20624 LR39772 Ampere Rating/ Voltage Rating 500mA-8A/ 250V AC 8.1A-15A/ 125V AC Ampere Range / Volt @ I.R. ability* 500mA-8A/125V AC@10,000A 500mA-8A/250V AC@200A 8.1A-15A/125V AC@10,000A 500mA-1A/250V AC@35A >1A-3.5A/250V AC@100A >3.5A-8A/250V AC@200A 8.1A-15A/125V AC@10,000A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 3SB 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B (260+/-5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Agency Approvals Melting I²T