0679H9100-05

Type 0679H Square Ceramic Surface Mount Quick Acting Fuse 0679H Series – 2410 Size RoHS Compliant Features - Quick Acting, 2410 SMD - Compatible with 260℃, IR Pb-free solder process - Wide range of current rating from 250mA to 15A - Wide operating temperature range, -55℃ to 125℃ - Tape & Reel for auto-insert SMD process - AEC-Q Compliant - Fully compliance with EU Directive 2011/65/EU and amending directive 2015/863, Compliant with exemption 7(a) - Halogen Free, (MSL = 1) - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications - AEC-Q Compliant Notebook LCD monitor PC computer Office electronic equipment Industrial equipment Medical equipment POE, POE+ LCD / LED monitor Power supply LCD / LED TV Safety Agency Approvals Safety Agency Safety Agency Certificate Electrical Characteristics E20624 (UL/CSA/STD. 248-14) Blow Time Testing Current Minimum Maximum 100% 4 Hrs. N/A 200% N/A 5 Sec HALOGEN FREE = Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* 250mA-3A/350V@ 50A AC 72V@100A DC 250mA–3A/350V AC 72V DC 3.5A-5A/350V@50A AC 3.5A-15A/350V AC 60V@150A DC 60V DC 6.3A-15A/350V@50A-AC 60V@100A DC 250mA-3A/350V@ 50A AC 72V@100A DC 250mA–3A/350V AC R 50368185 Tested according to 72V DC 3.5A-5A/350V@50A AC IEC 60127-1:2006+A1+A2 3.5A-15A/350V AC 60V@150A DC IEC 60127-7:2015 60V DC 6.3A-15A/350V@50A-AC 60V@100A DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Materials Terminations : Silver Plated Caps On Fuse : “Current Rating”, “Q”, ”H”—laser marked on ceramic tube, “bel” stamped in end caps. Marking On Label : "bel", "0679H", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type 0679H 2/4 Environmental Specifications MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Shock Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Salt Spray Resistance Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A Insulation Resistance (After Opening) 10,000 ohms minimum. Solderability MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side (260℃,20 sec) Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition D. Bottom Side (260℃,10 sec) MIL-STD-202G, Method 107G, Test Condition B Thermal Shock (-65℃ to +125℃). Vibration Resistance Operating Temperature -55℃ to +125℃ Moisture Sensitivity Level 1 (According to IPC J-Std-020) High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA-104,Test Condition B Operational life MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs. MIL-STD-202 Method 108, Test Condition D Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration MIL-STD-202 Method 204 Biased humidity Resistance to soldering heat Thermal shock MIL-STD-202 Method 210,Test condition B MIL-STD-202 Method 107 Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Electrical characterization 3 temperature electrical Electrical Specifications Agency Approvals Melting I²T