0680H7000-01

Type 0680H Enhanced-breaking Capability Brick Fuse 0680H Series – 2410 Size RoHS Compliant Features - Slow Blow, 2410 SMD - Compatible with 260℃, IR Pb-free solder process - Wide range of current rating from 500mA to 15A - Wide operating temperature range, -55℃ to 125℃ - Tape & Reel for auto-insert SMD process - RoHS compliant with exemption 7(a) Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free, (MSL = 1) - AEC-Q Compliant - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications AEC-Q Compliant Electrical Characteristics (UL/CSA/STD.248-14) Blow Time Testing Current Minimum Maximum 100% 4 Hrs. N/A 200% N/A 120 Sec - Notebook - LCD monitor - PC computer - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - LCD / LED monitor - Power supply - LCD / LED TV -Storage system -Telecom system -Wireless basestation -White goods -Game console -Battery charging circuit protection HALOGEN FREE = Safety Agency Approvals Safety Agency Safety Agency Certificate Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* 500mA-7A/125V AC @100A 125V DC @500A 72V DC @5000A >7A-15A/100V AC @150A 125V AC @50A 125V DC @500A 72V DC @5000A 500mA-7A/125V AC 125V DC E506667 >7A-15A/125V AC 125V DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Materials Terminations : Silver Plated Caps /Gold Plated Caps/Palladium Plated Caps On Fuse : “Current Rating”, “S”, ”H”—laser marked on ceramic tube, “bel” stamped in end caps. Marking On Label : "bel", "0680H", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type 0680H 2/4 Environmental Specifications MIL-STD-202G Method 213,Test condition A (50G’s peak for 11 milliseconds : Half-sine waveform ) MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Thermal Shock Operating Temperature -55℃ to +125℃ Moisture Sensitivity Level 1 (According to IPC J-Std-020) High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA-104,Test Condition B Biased humidity Operational life Resistance to solvents Mechanical shock Vibration Resistance to soldering heat Thermal shock Solderability Board flex(SMD) Terminal strength MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs. MIL-STD-202 Method 108, Test Condition D MIL-STD-202 Method 215 MIL-STD-202 Method 213,Test Condition C MIL-STD-202G Method 204 Test condition D（10-2k HZ ,20G’s for 20minutes） MIL-STD-202 Method 210,Test condition B MIL-STD-202 Method 107 J-STD-002 Test B AEC-Q200-005 AEC-Q200-006 Electrical characterization 3 Temperature Electrical Electrical Specifications Part Number Ampere Rating 0680H0500-XX 500mA 1.1 1.5 Nominal melting I²T @10 In (A²Sec) 0.13 0.75 Y 0680H0630-XX 630mA 0.83 1.1 0.20 0.13 0.69 Y 750mA 0.53 0.85 0.28 0.29 0.64 Y 0680H0750-XX Typical Cold Resistance (ohms) Nominal Volt-drop @100% In (Volt) Voltage and Interrupting Ratings Nominal melting I²T