0680L1000-21

Type 0680L Square Ceramic Surface Mount Slow Blow Fuse 0680L Series – 2410 Size RoHS Compliant Features - Slow Blow, 2410 SMD - Compatible with 260℃, IR Pb-free solder process - Wide range of current rating from 375mA to 12A - Wide operating temperature range, -55℃ to 125℃ - Tape & Reel for auto-insert SMD process - AEC-Q Compliant - RoHS compliant with exemption 7(a) Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free, (MSL = 1) - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications AEC-Q Compliant Electrical Characteristics (UL/CSA/STD.248-14) Blow Time Testing Current Minimum Maximum 100% 4 Hrs. N/A 200% N/A 120 Sec 300% 0.15 Sec 3 Sec 800% 0.01 Sec 0.1 Sec - Notebook LCD monitor PC computer Office electronic equipment Industrial equipment Medical equipment POE, POE+ LCD / LED monitor Power supply LCD / LED TV -Storage system -Telecom system -Wireless basestation -White goods -Game console -Battery charging circuit protection HALOGEN FREE = Safety Agency Approvals Safety Agency Safety Agency Certificate Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 375mA-7A/125V AC @50A 125V DC @100A 75V DC @500A >7A-12A/50V AC @100A 75V DC @500A 375mA-7A/125V AC 125V DC E506667 >7A-12A/50V AC 75V DC 50268578 EN 60127-1: 2006+A1+A2 EN 60127-4: 2005+A1+A2 375mA-7A/125V AC @50A 125V DC @100A 75V DC @500A >7A-12A/50V AC @100A 75V DC @500A 375mA-7A/125V AC 125V DC >7A-12A/50V AC 75V DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Materials Terminations : Silver Plated Caps /Gold Plated Caps/Palladium Plated Caps On Fuse : “Current Rating”, “T”, ”L”—laser marked on ceramic tube, “bel” stamped in end caps. Marking On Label : "bel", "0680L", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type 0680L 2/4 Environmental Specifications MIL-STD-202G Method 213,Test condition A (50G’s peak for 11 milliseconds : Half-sine waveform ) MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Thermal Shock Operating Temperature -55℃ to +125℃ Moisture Sensitivity Level 1 (According to IPC J-Std-020) High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA-104,Test Condition B MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs. MIL-STD-202 Method 108, Test Condition D MIL-STD-202 Method 215 MIL-STD-202 Method 213,Test Condition C MIL-STD-202G Method 204 Test condition D（10-2k HZ ,20G’s for 20minutes） Biased humidity Operational life Resistance to solvents Mechanical shock Vibration Resistance to soldering heat Thermal shock Solderability Board flex(SMD) Terminal strength Electrical characterization MIL-STD-202 Method 210,Test condition B MIL-STD-202 Method 107 J-STD-002 Test B AEC-Q200-005 AEC-Q200-006 3 Temperature Electrical Electrical Specifications Part Number Ampere Rating Typical Cold Resistance (ohms) Volt-drop @100% In (Volt) max. 0680L0375-XX 375mA 0.93 0680L0500-XX 500mA 0680L0630-XX 630mA 0680L0750-XX Agency Approvals Melting I²T @10 In (A²Sec) Melting I²T