0685F3000-01

Type C1F Surface Mount Fast Acting Chip Fuse C1F Series – 1206 Size RoHS 2 Compliant Features - Fast Acting, with improved surge withstand performance - Small size, 1206 SMD - Current rating from 250mA to 8A, fuse marked with ampere code - Wide operating temperature range from -55℃ to 125℃ - Tape and Reel for automatic SMD placement - Compatible with 260℃ IR Pb-free and wave soldering process - AEC-Q Compliant - RoHS 2 compliant (MSL = 1) - Halogen Free - Lead Free - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications AEC-Q Compliant Typical Part Marking Fuse body (ceramic white side) marked with marking code. - Automotive Navigation System - Thin film transistor LCD flat-panel display screen - Notebook - PC computer - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - LCD / LED monitor - Power supply - LCD / LED TV - DC-DC Converter LEAD FREE = HALOGEN FREE = Electrical Characteristics (UL STD. 248-14) Blow Time Testing Current Example: Minimum Maximum 100% 4 Hrs. N/A 200% N/A 5 Sec 300% N/A 0.2 Sec Safety Agency Approvals Safety Agency Safety Agency Certificate E20624 Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 250mA–8A/125V AC /63V DC Current Rating Marking Code Current Rating Marking Code 250mA E 2.5A T 375mA H 3A 3 500mA J 3.5A Z 750mA M 4A 4 1A 1 5A 5 1.25A P 6A 6 On Fuse : 1.5A R 7A 7 Marking Code 2A 2 8A 8 250mA–6A/100A@ 125V AC /50A@ 63V DC 7A–8A/35A@ 125V AC /50A@ 63V DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Substrate Materials Terminations : Ag / Ni / Sn (100% Lead-free) Element Cover Coating : Lead-free Glass Marking On Label : "bel", "C1F", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type C1F 2/4 Temperature Derating Curve Average Time Current Curve Electrical Specifications Part Number Ampere Rating (A) 0685F0250-XX 250mA E 2.30 0.813 0.0002 Maximum Power Dissipation @100% In (W) 0.20 0685F0375-XX 375mA H 1.25 0.789 0.0007 0.30 Y 0685F0500-XX 500mA J 0.87 0.693 0.0015 0.35 Y 0685F0750-XX 750mA M 0.43 0.476 0.0051 0.36 Y 0685F1000-XX 1A 1 0.28 0.421 0.012 0.42 Y 0685F1250-XX 1.25A P 0.210 0.411 0.023 0.51 Y 0685F1500-XX 1.5A R 0.165 0.400 0.040 0.60 Y 0685F2000-XX 2A 2 0.068 0.194 0.085 0.39 Y 0685F2500-XX 2.5A T 0.049 0.198 0.15 0.50 Y 0685F3000-XX 3A 3 0.039 0.166 0.19 0.50 Y 0685F3500-XX 3.5A Z 0.032 0.164 0.21 0.57 Y 0685F4000-XX 4A 4 0.026 0.164 0.33 0.66 Y 0685F5000-XX 5A 5 0.020 0.164 0.83 0.82 Y 0685F6000-XX 6A 6 0.015 0.163 1.3 0.98 Y 0685F7000-XX 7A 7 0.012 0.154 2.2 1.08 Y Marking Code Nominal Cold Resistance (ohms) Maximum Volt-drop @100% In (Volt) max. Voltage and Interrupting Ratings See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings Nominal Melting I²T @10 In (A² Sec) Agency Approvals Y 0685F8000-XX 8A 8 0.010 0.148 3.5 1.18 Y Consult manufacturer for other ratings NOTES: Test Conditions All test for ratings 250mA - 5A were conducted with fuse samples soldered on a PCB (1.6mm thick) test board with copper traces measuring 0.035 mm (35μm) nominal thickness (1 oz. clad), 5mm wide and 100mm overall length. All test for ratings 6A-8A were conducted with fuse samples soldered on a PCB (1.6mm thick) test board with copper traces measuring 0.070 mm (70μm) nominal thickness (2 oz. clad), 7.5mm wide and 100mm overall length. Device designed to be mounted with marking facing up. Device designed to carry rated current for 4 hours minimum. It is recommended that device be operated continuously at no more than 80% of rated current when in a +25°C ambient, with further derating at elevated ambient temperatures. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C1F Jan2019 Type C1F 3/4 Environmental Specifications Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Solderability Resistance to solder Heat Thermal Shock Operating Temperature Moisture Sensitivity Level MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA -104,Test Condition B MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side(260℃,20 sec) MIL-STD-202G, Method 210F, Test Condition D. Bottom Side(260℃,10 sec) MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Biased humidity MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs . Operational life MIL-STD-202 Method 108, Test Condition D Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration MIL-STD-202 Method 204 Resistance to soldering heat MIL-STD-202 Method 210,Test condition B Thermal shock MIL-STD-202 Method 107 Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 -55℃ to +125℃ Terminal strength AEC-Q200-006 1 (According to IPC J-Std-020) Electrical characterization 3 temperature electrical Soldering Parameters IR Reflow Profile (IPC/JEDEC J-STD-020D) Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 150℃ 200℃ 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3℃/second max. Liquidous temperature (TL) Time at liquidous (tL) 217℃ 60-150 seconds Peak temperature (Tp) 260℃ max Time (tp) within 5℃ of the specified classification temperture (Tc) 30 seconds Average ramp-down rate (Tp to Tsmax) 6℃/second max. Time 25℃ to peak temperature 8 minutes max. Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate Heating rate during preheat Final preheat temperature 200℃ / second typical 1 - 2℃ / second Max 4℃ / second within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C1F Jan2019 Type C1F 4/4 Fuse FGNO Explanation 0685 F [XXXX] -XX 0685F=C1F; [XXXX]=Ampere Rating; XX=See Ordering Information as below Fraction Decimal Milliamps Bel FGNO[XXXX] 1/4 0.250 250 0250 3/8 .375 375 0375 1/2 .500 500 0500 3/4 .750 750 0750 Fraction Amps Bel FGNO[XXXX] 1.0 1 1000 1-1/4 1.25 1.25 1250 1-1/2 1.50 1.5 1500 2.0 2 2000 2.5 2.5 2500 3.0 3 3000 3.5 3.5 3500 4.0 4 4000 5.0 5 5000 6.0 6 6000 7.0 7 7000 8.0 8 8000 2-1/2 3-1/2 Mechanical Dimensions Decimal Ordering Information Packaging Packaging Tape & Reel Packaging Specification Quantity Quantity & Packaging Code 8 mm wide tape with 7 inches Diameter reel EIA Standard 481-E 5000 0685FXXXX-01 Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C1F Jan2019