0686F1000-01

Type C2F Surface Mount Fast Acting Chip Fuse C2F Series – 0603 Size RoHS 2 Compliant Features - Fast Acting, with improved surge withstand performance - Small size, 0603 SMD - Current rating from 500mA to 8A,fuse marked with ampere code - Wide operating temperature range from -55℃ to 125℃ - Tape and Reel for automatic SMD placement - Compatible with 260℃ IR Pb-free and wave soldering process - AEC-Q Compliant - RoHS 2 compliant (MSL = 1) - Halogen Free - Lead Free - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications AEC-Q Compliant Typical Part Marking - Notebook - Automotive Navigation System - LED Lighting - Thin film transistor LCD flat-panel display screen - PC computer - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - LCD / LED monitor and LCD / LED TV - Power supply LEAD FREE = - DC-DC Converter HALOGEN FREE = Electrical Characteristics (UL STD. 248-14) Fuse body (ceramic white side) marked with marking code. Blow Time Testing Current Minimum Example: Maximum 100% 4 Hrs. N/A 200% N/A 5 Sec 300% N/A 0.2 Sec Safety Agency Approvals Safety Agency Safety Agency Certificate E20624 Current Rating Marking Code Current Rating Marking Code 500mA 750mA J M 3A 3.5A 3 Z 1A 1.25A 1.5A 2A 1 P R 2 4A 5A 6A 7A 4 5 6 7 2.5A T 8A 8 Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 500mA–8A/32V AC 500mA–8A/35A@ 32V AC /63V DC /50A@ 63V DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Substrate Materials Marking Terminations : Ag / Ni / Sn (100% Lead-free) Element Cover Coating : Lead-free Glass On Fuse : Marking Code On Label : "bel", "C2F", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type C2F 2/4 Temperature Derating Curve Average Time Current Curve Electrical Specifications Marking Code Nominal Cold Resistance (ohms) Maximum Volt-drop @100% In (Volt) max. Part Number Ampere Rating (A) 0686F0500-XX 500mA J 0.430 0.310 0686F0750-XX 750mA M 0.225 0.230 0686F1000-XX 1A 1 0.150 0.215 0686F1250-XX 1.25A P 0.110 0.195 0686F1500-XX 1.5A R 0.088 0.185 0686F2000-XX 2A 2 0.060 0.180 0686F2500-XX 2.5A T 0.035 0.115 0686F3000-XX 3A 3 0.026 0.110 0686F3500-XX 3.5A Z 0.021 0.103 0686F4000-XX 4A 4 0.017 0.100 0686F5000-XX 0686F6000-XX 5A 6A 5 6 0.0135 0.0113 0.098 0.106 0686F7000-XX 0686F8000-XX 7A 8A 7 8 0.0092 0.0075 0.107 0.097 Voltage and Interrupting Ratings See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings Nominal Melting I²T @10 In (A² Sec) Maximum Power Dissipation @100% In (W) Agency Approvals 0.0003 0.0013 0.16 0.17 Y Y 0.0028 0.0045 0.22 0.24 Y Y 0.008 0.014 0.027 0.28 0.36 0.29 Y Y Y 0.040 0.058 0.110 0.33 0.36 0.40 Y Y Y 0.140 0.210 0.49 0.64 Y Y 0.350 0.500 0.75 0.78 Y Y Consult manufacturer for other ratings NOTES: Test Conditions All test for ratings 500mA - 5A were conducted with fuse samples soldered on a PCB (1.6mm thick) test board with copper traces measuring 0.035 mm (35μm) nominal thickness (1 oz.clad), 5mm wide and 100 mm overall length. All test for ratings 6A-8A were conducted with fuse samples soldered on a PCB (1.6mm thick) test board with copper traces measuring 0.070 mm (70μm) nominal thickness (2 oz. clad), 7.5mm wide and 100 mm overall length. Device designed to be mounted with marking facing up. Device designed to carry rated current for 4 hours minimum. It is recommended that device be operated continuously at no more than 80% of rated current when in a +25°C ambient, with further derating at elevated ambient temperatures. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C2F Jan2019 Type C2F 3/4 Environmental Specifications Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Solderability Resistance to solder Heat Thermal Shock Operating Temperature Moisture Sensitivity Level MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) MIL-STD-202G, Method 201A (10-55 Hz,0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side(260℃,20 sec) MIL-STD-202G, Method 210F, Test Condition D. Bottom Side(260℃,10 sec) MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA -104,Test Condition B MIL-STD-202 Method 103,85C/85% RH with 10% operating power for 1000 hrs MIL-STD-202 Method 108, Test Condition D Biased humidity Operational life Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration MIL-STD-202 Method 204 Resistance to soldering heat MIL-STD-202 Method 210,Test condition B Thermal shock MIL-STD-202 Method 107 Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 -55℃ to +125℃ Terminal strength AEC-Q200-006 1 (According to IPC J-Std-020) Electrical characterization 3 temperature electrical Soldering Parameters IR Reflow Profile (IPC/JEDEC J-STD-020D) Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 150℃ 200℃ 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3℃/second max. Liquidous temperature (TL) Time at liquidous (tL) 217℃ 60-150 seconds Peak temperature (Tp) 260℃ max Time (tp) within 5℃ of the specified classification temperture (Tc) 30 seconds Average ramp-down rate (Tp to Tsmax) 6℃/second max. Time 25℃ to peak temperature 8 minutes max. Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate Heating rate during preheat Final preheat temperature 200℃ / second typical 1 - 2℃ / second Max 4℃ / second within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C2F Jan2019 Type C2F 4/4 Fuse FGNO Explanation 0686 F [XXXX] X XX 0686F=C2F; [XXXX]=Ampere Rating; XX=See Ordering Information as below Fraction Decimal Milliamps Bel FGNO[XXXX] 1/2 0.500 500 0500 3/4 .750 750 0750 Fraction Decimal Amps Bel FGNO[XXXX] 1.0 1 1000 1-1/4 1.25 1.25 1250 1-1/2 1.50 1.5 1500 2.0 2 2000 2.5 2.5 2500 3.0 3 3000 3.5 3.5 3500 4.0 4 4000 5.0 5 5000 6.0 6 6000 7.0 7 7000 8.0 8 8000 2-1/2 3-1/2 Mechanical Dimensions Ordering Information Packaging Packaging Tape & Reel Packaging Specification Quantity Quantity & Packaging Code 8 mm wide tape with 7 inches Diameter reel EIA Standard 481-E 5000 0686FXXXX-01 Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C2F Jan2019