0AFGBK160SBA

Type 0AFG 240V, BS88‐4 Semiconductor Fuse RoHS Compliant 0AFG Series Description BS88‐4 style stud‐mount Fuse Features - High speed semi‐conductor fuse - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 Applications Supplementary protection in appliance AC/DC, DC/DC module for EV/EV charging Physical Specifications Materials Body : Ceramic Terminals : Tin Plated Copper On Fuse : “bel”,“0AFGX”,”Voltage Rating“, Marking “Current Rating ”,”Interrupting Rating”, ”Appropriate Safety Logos”, “aR” On Label : "bel","0AFGX”,"Current Rating", "Voltage Rating", "Interrupting Rating", ”Appropriate Safety Logos” and " ", " "(China RoHS compliant). Safety Agency Approvals Safety Agency Safety Agency Certificate E491441 Electrical Characteristics Ampere Rating / Voltage Rating Ampere Range / Volt @ I.R. ability* 25A -180A / 240V AC 25A - 180A / 240V @ 50kA AC 25A -180A / 150V DC 25A - 180A / 150V @ 10kA DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Total Cleaning I²t Arc Voltage Power Loss The total clearing I²t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I²t is found by multiplying by correction factor, K, given as a function of applied working voltage, Eg, (rms). This curve gives the peak arc voltage, UL, which may appear across the fuse during its operation as a function of the applied working voltage, Eg, (rms) at a power factor of 15%. Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, Kp, is given as a function of the RMS load current, Ib, in % of the rated current. Specifications subject to change without notice belfuse.com/circuit-protection Type 0AFG 2/3 Temperature Re-Rating Curve Average Time Current Curve Operating temperature: -50℃ to 100℃ Electrical Specifications Part Number Rated Current (RMS-A) Voltage and Interrupting Ratings Energy Integrals I²t (A²S) Agency Approvals Pre-Arcing Clearing at 120V Clearing at 240V Power loss (W) 18 120 250 4 Y 100 500 1400 7 Y 300 1900 3800 10 Y 600 3800 7500 10 Y 0AFGx9250Sxx 25A 0AFGx9500Sxx 50A 0AFGx9800Sxx 80A 0AFGxK100Sxx 100A 0AFGxK125Sxx 125A 600 3800 7500 16 Y 0AFGxK160Sxx 160A 1100 7000 16000 20 Y 0AFGxK180Sxx 180A 1600 12000 29000 21 Y See Table of Ratings on Page 1 for Voltage and associated Interrupting Ratings Consult manufacturer for other ratings -Typical Pre-arcing I²t are measured at 10In Current -Power loss provided at rated current Conditions for operation in service Where the following conditions apply, fuses complying with this standard are deemed capable of operating satisfactorily without further qualification. Normal temperature: -5℃ to 40℃; The altitude of the site of installation of the fuses does not exceed 2000m above sea level; The air is clean and the relative humidity does not exceed 50 % at the maximum temperature of 40℃; Higher relative humidities are permitted at lower temperatures, e.g. 90 % at 20℃; Under these conditions, moderate condensation may occasionally occur due to variation in temperature. For operation conditions other than above, please contact manufacturer. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2023 Bel Fuse, Inc. Rev. 0AFG May2023 Type 0AFG 3/3 Fuse FGNO Explanation 0AFG X [XXXX] -XX 0AFGB=0AFGB; [XXXX]=Ampere Rating; XX=See Ordering Information as below Amps Bel FGNO[XXXX] 25 9250 50 9500 80 9800 100 K100 125 K125 160 K160 180 K180 Mechanical Dimensions Ordering Information Packaging Packaging Option Quantity Packaging Code Bulk 20pcs/box BA Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2023 Bel Fuse, Inc. Rev. 0AFG May2023