12IMR3-1515-2

IMR Series 3...15 Watt DC-DC Converter Input voltage range up to 72 V DC 1, 2 and 3 outputs up to 30 V DC 500 V DC I/O electric strengh test voltage • Low cost • Short circuit proof • Efficiency up to 82% Selection chart Output 1 Output 2 Output 3 Uo nom Io nom Uo nom Io nom Uo nom Io nom [V DC] [mA] [V DC] [mA] [V DC] [mA] 3.3 1500 3.3 3000 5 500 5 1000 5 3000 12 250 12 500 12 1250 15 200 15 400 15 1000 +5 250 –5 250 +5 50 –5 50 +12 125 –12 125 +12 250 –12 250 +12 625 –12 625 +15 100 –15 100 +15 200 –15 200 +15 500 –15 500 5 2000 +12 200 –12 200 5 2000 +15 200 –15 200 1 Type Input voltage1 9...18 V DC 12 IMR 6-03-2 12 IMR 15-03-2 12 IMR 3-05-2 12 IMR 6-05-2 12 IMR 15-05-2 12 IMR 3-12-2 12 IMR 6-12-2 12 IMR 15-12-2 12 IMR 3-15-2 12 IMR 6-15-2 12 IMR 15-15-2 12 IMR 3-0505-2 12 IMR 6-0505-2 12 IMR 3-1212-2 12 IMR 6-1212-2 12 IMR 15-1212-2 12 IMR 3-1515-2 12 IMR 6-1515-2 12 IMR 15-1515-2 12 IMR 15-051212-2 12 IMR 15-051515-2 Type Input voltage 18...36 V DC 24 IMR 6-03-2 24 IMR 15-03-2 24 IMR 3-05-2 24 IMR 6-05-2 24 IMR 15-05-2 24 IMR 3-12-2 24 IMR 6-12-2 24 IMR 15-12-2 24 IMR 3-15-2 24 IMR 6-15-2 24 IMR 15-15-2 24 IMR 3-0505-2 24 IMR 6-0505-2 24 IMR 3-1212-2 24 IMR 6-1212-2 24 IMR 15-1212-2 24 IMR 3-1515-2 24 IMR 6-1515-2 24 IMR 15-1515-2 24 IMR 15-051212-2 24 IMR 15-051515-2 Type Input voltage 36...72 V DC 48 IMR 6-03-2 48 IMR 15-03-2 48 IMR 3-05-2 48 IMR 6-05-2 48 IMR 15-05-2 48 IMR 3-12-2 48 IMR 6-12-2 48 IMR 15-12-2 48 IMR 3-15-2 48 IMR 6-15-2 48 IMR 15-15-2 48 IMR 3-0505-2 48 IMR 6-0505-2 48 IMR 3-1212-2 48 IMR 6-1212-2 48 IMR 15-1212-2 48 IMR 3-1515-2 48 IMR 6-1515-2 48 IMR 15-1515-2 48 IMR 15-051212-2 48 IMR 15-051515-2 12 IMR 3 and 12 IMR 15 types: output current Io nom see: Application Note - Output Data www.power-one.com Edition 5/07.2001 1 Board Mountable Input Input voltage continuous range, 12 V continuous range, 24 V continuous range, 48 V reverse input voltage, current limitation IMR Series 9...18 V DC 18...36 V DC 36...72 V DC Protection Output Efficiency Minimum load Line regulation Load regulation recommended Ui min...Ui max, Io nom Ui nom, 0...100% Io nom, single output models dual output models (traching) triple output models (traching) Ui nom, (20...100%) Io nom up to 82% 20% Io nom ±1% 2% 5% 6% 2% Uo nom Ripple and noise Protection Overload protection No-load protection Ui nom, full load 125% Pi nom Safety I/O electric strength test Electromagnetic interference per EN 60950 conducted per EN 55022 with external filter 500 V DC class B Environmental Operating temperature Storage temperature Relative humidity MTBF Ui nom, Io nom non operational non condensing per MIL-HDBK-217F, N2 –10...50 °C –40...100 °C 95% >3'000'000 h Options Extended temperature range –25...71 °C, ambient, operating, IMR 3, IMR 6 -7 www.power-one.com Edition 5/07.2001 2 IMR Series Mechanical data 3...15 Watt DC-DC Converter European Projection Tolerances ±0.3 mm (0.012") unless otherwise indicated. IMR 3 31.8 (1.25") 2.54 (0.1") Pin allocation IMR 3 Pin 2 3 9 11 14 16 22 23 Single output unit Vi– Vi– n.c. n.c. Vo+ Vo– Vi+ Vi+ Dual output unit Vi– Vi– COM Vo– Vo+ COM Vi+ Vi+ 15.24 (0.6") Measuring point of case temperature TC S09038 3 (0.12") ø 0.5 (0.02") IMR 6 5 (0.2") 12 (0.47") 50.8 (2") 5.08 (0.2") S09035 12 (0.47") 20.3 (0.8") Vi– Vi+ ø 1(0.04") 20.32 (0.8") Vo+ COM Vo– 2 x 10.2 (0.4") Measuring point of case temperature TC www.power-one.com Edition 5/07.2001 50.8 (2") 3 Board Mountable IMR 15 50.8 (2") 5 (0.2") 12 (0.47") 12.7 (0.5") 3 x 5.08 (0.2") IMR Series S09047 ø 1(0.04") SD Vi– Vi+ 45.72 (1.8") Vo3COM Vo1+ Vo2+ 5 x 10.16 (0.42") Measuring point of case temperature TC Accessories DIN and chassis mounting bracket. www.power-one.com Edition 5/07.2001 50.8 (2") 4