20IMX15-05-05-9

IMX 15, IMY 15 Series 15 Watt DC-DC Converters Wide input voltage ranges up to 150 V DC 1 or 2 outputs up to 48 V DC 1500...4000 V DC I/O electric strength test LGA • Reinforced isolation for IMY-models • Magnetic feedback • Synchronous rectifier for 2.5, 3.3 and 5 V outputs • Short circuit protection Selection chart Output 1 Uo nom Io nom [V DC] [mA] 2.5 4500 2.5 4500 3.3 4500 3.3 4500 3.3 4500 5 3500 5 3500 5 3500 5.1 2300 5.1 2500 5.1 2500 +5.1 1350 +5.1 1500 +5.1 1500 5 1300 5 1400 5 1400 12 650 12 700 12 700 15 500 15 560 15 560 24 320 24 350 24 350 Output 2 Uo nom Io nom [V DC] [mA] +3.3 1350 +3.3 1500 +3.3 1500 5 1300 5 1400 5 1400 12 650 12 700 12 700 15 500 15 560 15 560 24 320 24 350 24 350 Input voltage Ui [V DC] 8.4...36 16.8...75 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 Type Options (for availability consult sales point) -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, i, L, C, Z -8, R, K, i, L, C, Z -8, R, K, i, L, C, Z -8, R, i, L, C, Z -8, R, K, i, L, C, Z -8, R, K, i, L, C, Z -8, R, i, L, C, Z -8, R, K, i, L, C, Z -8, R, K, i, L, C, Z -8, R, i, L, C, Z -8, R, i, L, C, Z -8, R, i, L, C, Z -8, R, i, L, C, Z 20 IMX 15-2.5-9RG 40 IMX 15-2.5-9RG 20 IMX 15-03-9RG 40 IMX 15-03-9RG 110 IMY 15-03-9RG 20 IMX 15-05-9RG 40 IMX 15-05-9RG 110 IMY 15-05-9RG 20 IMX 15-05-9R 40 IMX 15-05-9R 110 IMY 15-05-9R 20 IMX 15-0503-9R 40 IMX 15-0503-9R 110 IMY 15-0503-9R 20 IMX 15-05-05-9 40 IMX 15-05-05-9 110 IMY 15-05-05-9 20 IMX 15-12-12-9 40 IMX 15-12-12-9 110 IMY 15-12-12-9 20 IMX 15-15-15-9 40 IMX 15-15-15-9 110 IMY 15-15-15-9 20 IMX 15-24-24-9 40 IMX 15-24-24-9 110 IMY 15-24-24-9 www.power-one.com 1 Board Mountable Input Input voltage range 20 IMX 15 40 IMX 15 110 IMY 15 IMX 15, IMY 15 Series 8.4...36 V DC 16.8...75 V DC 50...150 V DC Output Output voltage setting accuracy Minimum load Line/load regulation Line regulation Load regulation Output voltage switching noise Efficiency Ui nom , 50% lo nom ±1% Uo nom recommended for double output models 10% lo nom Ui min...Ui max, 50% lo nom, models R (magn. feedback) ±0.5% Uo nom Ui min...Ui max, 50% lo nom, models without R ±1% Uo nom Ui nom , 10...100% lo nom, models without R, main outp. ± 3% Uo nom tracking output, models without R ± 3% Uo nom Ui nom , 0...100% lo nom, peak-peak, total max. 1...2% Uo nom Ui nom , lo nom up to typ 88% Control and protection Remote shut down Trim input for Uo Input undervoltage lock-out Overload protection No-load protection Temperature protection TTL-compatible input disabled with ≤ 0.7 V 80...105% Ui min...Ui max, fully protected, hiccup mode Ui min...Ui max Safety and EMC Electric strength test voltage Type of insulation Electromagnetic interference I/O (20 and 40 IMX/110 IMY) 1500/4000 V DC I/O (20 and 40 IMX supplementary/110 IMY re-inforced) conducted (with external filter) class B radiated class A Environmental Operating ambient temperature Ui nom, lo nom Storage temperature non operational Relative humidity non condensing –40...71 °C –40...100 °C 93% Options Extended temperature range Magnetic feedback Alternative pinout Inhibit input (reverse logic) SMD version C-pinout Open version –40...85 °C (derating above 71 °C), ambient, operating standard for all single output and -0503-models connected outputs, for compatibility TTL-compatible, disabled with ≥ 2.4 V or open-circuit with PCB lid connected outputs, no options possible no housing, not lacquered -8 R K i L C Z www.power-one.com 2 IMX 15, IMY 15 Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 15 Watt DC-DC Converters European Projection Standard and option K 10.5 (0.41") 45.72 (1.8") S09011 2.54 (0.1") 11 0.8 (0.03") 1 2 3 4 17 15 12 13 5.08 (0.2") 5 (0.19") 47 (1.85") 50.8 (2") Measuring point of case temperature TC C pinout (option C) 0.5 (0.02") 11.2 (0.44") 45.72 (1.8") 45.72 (1.8") S90010 5.08 (0.2") 3 1 2 5 40.65 (1.6") 4 3.4 (0.13") 50.8 (2") Measuring point of case temperature TC 20.3 (0.8") 36.83 (1.45") Fixing hole for M2 or KA 22 self tapping screws 40.65 (1.6") www.power-one.com 3 Board Mountable Open frame version (option Z) 10.5 (0.41") 45.72 (1.8") IMX 15, IMY 15 Series S90011 11 12 13 3 x 5.08 (0.2") ? (?") 1 14 2 3 4 15 16 17 5 (0.19") 48.26 (1.9") SMC version (option L) 11.5 (0.45") 54.57 (2.15") S90012 11 6 12 5 x 5.08 (0.2") 1 2 13 14 15 3 4 16 17 50.8 (2") Pin allocation Pin 1 2 3 4 5 6 11 12 13 15 17 single Vi+ Vi– SD Vo+ Vo– R Standard double Vi+ Vi– Trim SD Vo1+ Vo1– Vo2+ Vo2– n.c./R -0503Vi+ Vi– n.c. SD Vo2+ Go Vo1+ Go R Option K dual Vi+ Vi– SD Vo+ Go Vo– n.c. Option C single dual Vi+ Vi+ Vi– Vi– Vo+ Vo+ Go Vo– Vo– Option L and Z single double Vi+ Vi+ Vi– Vi– n.c. Trim SD SD n.c. n.c. n.c. n.c. Vo1– Vo2– Vo+ Vo1+ Vo– Vo2– R n.c. 6 x 5.08 (0.2") 40.65 (1.6") 5 6 x 5.08 (0.2") www.power-one.com 4