20IMX15-12-12-9

IMX 15, IMY 15 Series 15 Watt DC-DC Converters Wide input voltage ranges up to 150 V DC 1 or 2 outputs up to 48 V DC 1500...4000 V DC I/O electric strength test LGA • Reinforced isolation for IMY-models • Magnetic feedback • Synchronous rectifier for 2.5, 3.3 and 5 V outputs • Short circuit protection Selection chart Output 1 Output 2 Input voltage Type Uo nom [V DC] 3.3 3.3 3.3 5 5 5 5.1 5.1 5.1 12 12 15 15 +5.1 +5.1 +5.1 5 5 5 12 12 12 15 15 15 24 24 24 Io nom [mA] 4500 4500 4500 3500 3500 3500 2300 2500 2500 1300 1300 1000 1000 1350 1500 1500 1300 1400 1400 650 700 700 500 560 560 320 350 350 Uo nom [V DC] +3.3 +3.3 +3.3 5 5 5 12 12 12 15 15 15 24 24 24 Io nom [mA] 1350 1500 1500 1300 1400 1400 650 700 700 500 560 560 320 350 350 Ui [V DC] 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4…36 16.8…75 8.4…36 16.8…75 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 8.4...36 16.8...75 50...150 20 IMX 15-03-9RG 40 IMX 15-03-9RG 110 IMY 15-03-9RG 20 IMX 15-05-9RG 40 IMX 15-05-9RG 110 IMY 15-05-8RG 20 IMX 15-05-9R 40 IMX 15-05-9R 110 IMY 15-05-8R 20 IMX 15-12-9C 40 IMX 15-12-9C 20 IMX 15-15-9C 40 IMX 15-15-9C 20 IMX 15-0503-9R 40 IMX 15-0503-9R 110 IMY 15-0503-8R 20 IMX 15-05-05-9 40 IMX 15-05-05-9 110 IMY 15-05-05-8 20 IMX 15-12-12-9 40 IMX 15-12-12-9 110 IMY 15-12-12-8 20 IMX 15-15-15-9 40 IMX 15-15-15-9 110 IMY 15-15-15-8 20 IMX 15-24-24-9 40 IMX 15-24-24-9 110 IMY 15-24-24-8 Options (for availability consult sales point) -8, i, L, C, Z -8, i, L, C, Z i, Z -8, i, L, C, Z -8, i, L, C, Z i, Z -8, i, L, C, Z -8, i, L, C, Z i, Z -8 -8 -8 -8 -8, i, L, Z -8, i, L, Z -8, i, L, Z -8, K, i, L, C, Z -8, K, i, L, C, Z i, Z -8, K, i, L, C, Z -8, K, i, L, C, Z i, Z -8, K, i, L, C, Z -8, K, i, L, C, Z i, Z -8, i, L, C, Z -8, i, L, C, Z i, Z www.power-one.com Edition 4/04.2001 1 Board Mountable Input Input voltage range 20 IMX 15 40 IMX 15 110 IMY 15 IMX 15, IMY 15 Series 8.4...36 V DC 16.8...75 V DC 50...150 V DC Output Output voltage setting accuracy Minimum load Line/load regulation Line regulation Load regulation Output voltage switching noise Efficiency Ui nom , 50% lo nom ±1% Uo nom recommended for double output models 10% lo nom Ui min...Ui max, 50% lo nom, models R (magn. feedback) ±0.5% Uo nom Ui min...Ui max, 50% lo nom, models without R ±1% Uo nom Ui nom , 10...100% lo nom, models without R, main outp. ± 3% Uo nom tracking output, models without R ± 3% Uo nom Ui nom , 0...100% lo nom, peak-peak, total max. 1...2% Uo nom Ui nom , lo nom up to typ 88% disabled with ≤ 0.7 V 80...105% Control and protection Remote shut down Trim input for Uo Input undervoltage lock-out Overload protection No-load protection Temperature protection TTL-compatible input Ui min...Ui max, fully protected, hiccup mode Ui min...Ui max Safety and EMC Electric strength test voltage Type of insulation Electromagnetic interference I/O (20 and 40 IMX/110 IMY) 1500/4000 V DC I/O (20 and 40 IMX supplementary/110 IMY re-inforced) conducted (with external filter) class B radiated class A Environmental Operating ambient temperature Ui nom, lo nom Storage temperature non operational Relative humidity non condensing –40...71 °C –40...100 °C 93% Options Extended temperature range Alternative pinout Inhibit input (reverse logic) SMD version C-pinout Open version –40...85 °C (derating above 71 °C), ambient, operating connected outputs, for compatibility TTL-compatible, disabled with ≥ 2.4 V or open-circuit with PCB lid connected outputs, no options possible excl. -8 no housing, not lacquered -8 K i L C Z www.power-one.com Edition 4/04.2001 2 IMX 15, IMY 15 Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 15 Watt DC-DC Converters European Projection Standard and option K 10.5 (0.41") 45.72 (1.8") S09011 2.54 (0.1") 0.8 (0.03") 1 2 3 4 bottom view 47 (1.85") 50.8 (2") 12 13 5.08 (0.2") 20.3 (0.8") 11 15 17 Fixing hole for M2 or KA 22 self tapping screws Measuring point of case temperature TC C pinout (option C) 0.5 (0.02") 11.2 (0.44") 45.72 (1.8") 45.72 (1.8") S90010 5.08 (0.2") ø 1.0 (0.04") 3 1 2 5 bottom view 50.8 (2") 1.0 (0.04") 40.65 (1.6") 4 Measuring point of case temperature TC 36.83 (1.45") 40.65 (1.6") www.power-one.com Edition 4/04.2001 3 Board Mountable Open frame version (option Z) 10.5 (0.41") 45.72 (1.8") IMX 15, IMY 15 Series S90011 ø 2.54 (0.1") 11 0.8 (0.03") 12 6 x 5.08 (0.2") 6 x 5.08 (0.2") 13 1 2 3 4 bottom view 48.26 (1.9") 17 15 SMC version (option L) 11.5 (0.45") 54.6 (2.15") 2.8 (0.11") S90012 3 x 5.08 (0.2") 11 6 12 5 x 5.08 (0.2") 40.65 (1.6") 5 1 2 15 3 4 bottom view 50.8 (2") 16 17 13 14 Pin allocation Standard and Option Z single double -05031 Vi+ Vi+ Vi+ 2 Vi– Vi– Vi– 3 Trim n.c. 4 SD SD SD 5 6 11 Vo1+ Vo2+ 12 Vo1– Go 13 Vo+ Vo2+ Vo1+ 15 Vo– Vo2– Go 17 R n.c. R 1 Pin 14 and pin 16 are not connected. Pin1 Option K dual Vi+ Vi– SD Vo+ Go Vo– n.c. Option C single dual Vi+ Vi+ Vi– Vi– Vo+ Vo+ Go Vo– Vo– Option L single double Vi+ Vi+ Vi– Vi– n.c. Trim SD SD n.c. n.c. n.c. n.c. n.c. Vo1 n.c. Vo1– Vo+ Vo2+ Vo– Vo2 R n.c. 38.8 (1.52") www.power-one.com Edition 4/04.2001 4