2250025-2

7 8 6 THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND THE OF BEL/STEWART/TRP CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN MANNER WITHOUT THE WRITTEN CONSENT OF TRP CONNECTOR. 5 PROPERTY ANY 4 3 2 1 REVISIONS PRODUCT MAY BE PROTECTED BY ONE OR MORE OF THE FOLLOWING US PATENTS: 5736910 5939955 6425781 6428361 6554638 6840817 7123117 7429195 7717749 7808751 6217391 6149050 7924130 P LTR DESCRIPTION DATE SEE LAST SHEET 3 DWN APVD RL 13JAN2015 TY 7 1. MATERIALS - HOUSING: THERMOPLASTIC, FLAMMABILITY RATING UL 94V-0. - SHIELD: BRASS 0.20mm THICK, PREPLATED WITH 0.76um MIN SEMI-BRIGHT NICKEL. SOLDER TABS POST DIPPED WITH 2.54um MIN SAC SOLDER. - CONTACTS: PHOSPHOR BRONZE 0.46mm X 0.30mm, PHOSPHOR BRONZE, 1.27um MIN NICKEL UNDERPLATE, WITH 1.27um MIN GOLD PLATING AT MATING INTERFACE AND 2.54um MIN MATTE TIN 0N SOLDER TAILS, - SOLDER TAILS: 0.25mmTHICK, PHOSPHOR BRONZE, 1.27um MIN OVERALL NICKEL UNDERPLATE, 3um TIN PLATE - LIGHT EMITTING DIODE (LED): DIFFUSED EPOXY LENS, 0.5mm X 0.5mm CARBON STEEL WIREFRAME LEADS PREPLATED WITH 2.03um MIN. SILVER PLATE OVER 1.02um MIN. NICKEL OVER 1.02um MIN. COPPER UNDERPLATE; LEADS POST-PLATED WITH 3.05um MIN. MATTE TIN AND/OR SAC SOLDER DIP OR PURE TIN SOLDER DIP 2250025-X YYWWD CHINA D 1.27 4 PLC 16.13 MAX 2 3 1.60 2 PLC 2 C 21.65 MAX RJ 8 RJ 1 6 LED 1 LED 2 RJ45 JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS PART 68 SUB PART F. MAGNETICS -APPLICATION: 10/100 BASE-T, EXTENDED TEMPERATURE -IMPEDANCE: 100 OHMS -TURNS RATIO (CHIP:CABLE): TX = 1:1, RX = 1:1 -OPEN CIRCUIT INDUCTANCE (OCL): 350uH MIN @100kHz, 0.1VRMS, 8mADC BIAS FROM -40°C TO +85°C, TX AND RX -PERFORMANCE @ 25°C: INSERTION LOSS (IL): 1.1dB MAX FROM 0.5MHz TO 100MHz RETURN LOSS (RL): 18dB MIN FROM 0.5MHz TO 30MHz 18-20LOG(f/30)dB MIN FROM 30.1MHz TO 60MHz 12dB MIN FROM 60.1MHz TO 80MHz CROSSTALK ATTENUATION: 35dB MIN FROM 0.5MHz TO 40MHz 33-20LOG(f/50)dB MIN FROM 40.1MHz TO 100MHz COMMON MODE REJECTION RATIO (CMRR): 30dB MIN FROM 0.5MHz TO 100MHz - ISOLATION VOLTAGE: 2250VDC FOR 60 SECONDS WITH A RISE TIME OF 500 V/SEC 4. OPERATING TEMPERATURE: FROM 13.75 3.68 FOR SIGNAL PINS 8 PLC AND LED LEGS 4 PLC 6 5 D C -40°C TO +85°C. INDICATED MAGNETIC CONNECTIONS ARE SYMMETRICAL TO SUPPORT AUTO-MDI/MDIX. 6 LEDS ARE DRIVEN WITH CONSTANT CURRENT AT APPROX 20mA lD): GREEN 568 nm TYP. AT IF = 20mA LED COLOR: DOMINATE WAVELENGTH ( FORWARD VOLTAGE (VF): GREEN 2.2V TYP. at IF = 20mA DOMINATE WAVELENGTH ( lD): YELLOW 588 nm TYP. AT IF = 20mA FORWARD VOLTAGE (VF): YELLOW 2.1V TYP. at IF = 20mA DOMINATE WAVELENGTH ( lD): RED 640 nm TYP. AT IF = 20mA FORWARD VOLTAGE (VF): RED 2.2V TYP. at IF = 20mA 7 TRP CONNECTOR LOGO, PART NUMBER, DATE CODE, COUNTRY OF ORIGIN AND AGENCY APPROVAL MARKING IN APPROXIMATE LOCATION SHOWN. 3.43 10.80 8. THESE PARTS ARE RECOMMENDED FOR WAVE SOLDERING PROCESS,PREHEAT TEMPERATURE IS 120°C TO 160°C, 120 SECONDS TO 180 SECONDS, PEAK WAVE SOLDERING TEMPERATURE IS 260°C MAX,10 SECONDS MAX. B B 16.55 2.03 0.08 14.35 0.08 0.08 GREEN YELLOW GREEN YELLOW 2250025-2 GREEN RED GREEN RED 2250025-1 9 10 10 9 11 12 LED 1 A THIS DRAWING IS A CONTROLLED DOCUMENT. 12 11 PART NUMBER LED 2 DWN ROY LIU 30MAY2013 30MAY2013 TOWER YU/FRANK LIU APVD 30MAY2013 TONY YUAN CHK SUGGESTED PANEL OPENING DIMENSIONS: mm PRODUCT SPEC 108-104004 xxxxx TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 0.25 0.25 0.25 - APPLICATION SPEC - MODEL NAME MAGJACK - A SINGLE Non-PoE CUSTOMER DRAWING DONGGUAN CHINA DESC SIZE A1 CAGE CODE 1X1 426P1ET 10/100 TAB DOWN W/ LED DRAWING NO 2250025 SCALE 4:1 SHEET RESTRICTED TO 1 OF - 3 REV 3 7 8 C COPYRIGHT TRP connector 6 5 4 3 2 1 ALL RIGHTS RESERVED Z A B TYP 2.03 RDN 1.27 0.08 2 4 6 1 8 7 5 3 T1 2x 8.89 1.57 3.20 3.04 0.05 Z SHIELD CMC2 12 C R2 2.54 R4 SUGGESTED PCB LAYOUT COMPONENT SIDE RJ-8 RJ-7 RXN RJ-6 RJ-5 RJ-4 RJ-3 15.49 RXP -Z- RJ-2 2.54 R3 TXN Z A B 0.91 RJ-1 0.08 0.91 11.43 B SHIELD 6.90 REF TXP 1.02 11 C1 Z A -B- 4X T2 R1 0.05 7 CMC1 4.06 3.20 5 Z A B C 10 D 0.08 -A- 9 5 3 8 1CT:1CT 1 6 3 1CT:1CT 4 2 RCT 0.89 RDP 8x TDP D TYP TDN 2.54 TCT 426P1ET 10/100 BASE-T CIRCUIT C1= 1000pF, 2kV CAPACITOR R1-R4= 75 Ohms, RESISTORS B A A THIS DRAWING IS A CONTROLLED DOCUMENT. DWN ROY LIU 30MAY2013 30MAY2013 TOWER YU/FRANK LIU APVD 30MAY2013 TONY YUAN CHK DIMENSIONS: mm PRODUCT SPEC 108-104004 xxxxx TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 0.25 0.25 0.25 - APPLICATION SPEC - MODEL NAME MAGJACK - SINGLE Non-PoE CUSTOMER DRAWING DONGGUAN CHINA DESC SIZE A1 CAGE CODE 1X1 426P1ET 10/100 TAB DOWN W/ LED DRAWING NO 2250025 SCALE 4:1 SHEET RESTRICTED TO 2 OF - 3 REV 3 7 8 C COPYRIGHT TRP connector 6 5 4 3 2 1 ALL RIGHTS RESERVED D D C_2250025 STOCK DISPOSITION A: CONTINUE AS IS B: REWORK C: SCRAP REVISION HISTORY C DATE REV CHANGES 30MAY2013 1 - 05JUN2013 2 ADD DASH NUMBER 2250025-2 3 EC-1411035 COMPANY LOGO CHANGE 13JAN2015 D: USE OLD FIRST E: PARTS TO CONFORM F: OTHER APPROVAL INVENTORY (A,B,C,D,E,F) WORK IN PROCESS (A,B,C,F) TONY YUAN - - - - MARKET REQUIREMENT TONY YUAN - - - - MARKET REUQIREMENT TONY YUAN - - - - REASON INITIAL RELEASE SUPPLIER ORDERS (A,E,F) OPEN CUST ORDERS (A,E,F) C B B A A THIS DRAWING IS A CONTROLLED DOCUMENT. DWN ROY LIU 30MAY2013 30MAY2013 TOWER YU/FRANK LIU APVD 30MAY2013 TONY YUAN CHK DIMENSIONS: mm PRODUCT SPEC 108-104004 xxxxx TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 0.25 0.25 0.25 - APPLICATION SPEC - MODEL NAME MAGJACK - SINGLE Non-PoE CUSTOMER DRAWING DONGGUAN CHINA DESC SIZE A1 CAGE CODE 1X1 426P1ET 10/100 TAB DOWN W/ LED DRAWING NO 2250025 SCALE 4:1 SHEET RESTRICTED TO 3 OF - 3 REV 3