24IMO6-1212-2

IMO Series 6 Watt DC-DC Converters Input voltage range up to 72 V DC 1 or 2 outputs up to 30 V DC 1500 V DC I/O electric strength test voltage • Wide input range • Short circuit protection • Industry standard 2" x 1" foot print Selection chart Output 1 Uo nom Io nom [V DC] [mA] 3.3 1500 3.3 1500 5 1000 5 1000 12 500 12 500 15 400 15 400 +5 500 +5 500 +12 250 +12 250 +15 200 +15 200 Output 2 Uo nom Io nom [V DC] [mA] –5 500 –5 500 –12 250 –12 250 –15 200 –15 200 Input voltage Ui [V DC] 10...36 18...72 10...36 18...72 10...36 18...72 10...36 18...72 10...36 18...72 10...36 18...72 10...36 18...72 Rated power TA = 7 1°C Po tot [W] 5 5 5 5 6 6 6 6 5 5 6 6 6 6 Type Option 24 IMO 6-03-2 48 IMO 6-03-2 24 IMO 6-05-2 48 IMO 6-05-2 24 IMO 6-12-2 48 IMO 6-12-2 24 IMO 6-15-2 48 IMO 6-15-2 24 IMO 6-0505-2 48 IMO 6-0505-2 24 IMO 6-1212-2 48 IMO 6-1212-2 24 IMO 6-1515-2 48 IMO 6-1515-2 -7 -7 -7 -7 -7 -7 -7 -7 -7 -7 -7 -7 -7 -7 Input Input voltage Reverse voltage protection continuous range, 24 V continuous range, 48 V shunt diode 10...36 V DC 18...72 V DC Output Output voltage setting accuracy Minimum load Line regulation Load regulation Ripple and noise Efficiency Ui nom , lo nom not required Ui min...Ui max, lo nom Ui nom , 0...100% lo nom , single output models dual output models Ui nom , 0...100% lo nom, peak-peak, total Ui nom , lo nom ±2% Uo nom ±1% Uo nom 2% Uo nom max. 5% Uo nom max. 3% Uo nom up to 80% Control and protection Overload protection No-load protection Ui min, full load 150% Pi nom www.power-one.com 1 Board Mountable Safety and EMC Electric strength test voltage Electromagnetic interference I/O conducted conducted with external filter IMO Series 1500 V DC class A class B Environmental Operating ambient temperature Storage temperature Relative humidity MTBF Ui nom , lo nom non operational non condensing MIL-HDBK-217F, N2 –10...50 °C – 40...100 °C 95% >3'000'000 h Options Extended temperature range – 25...71 °C, ambient, operating -7 Accessories DIN and chassis mounting bracket Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 5 (0.2") 50.8 (2") S09112 European Projection 1 2 4 fl 1 (0.04") 5 12 (0.47") 20.32 (0.8") Pin allocation Pin 1 2 3 4 5 Single output Vi+ Vi– Vo+ no pin Vo– Dual output Vi+ Vi– Vo+ COM Vo– 2 x 10.16 (0.4") 5.08 (0.2") 3 25.4 (1") www.power-one.com 2