24IMS7-24-24-9

IMS 7 Series 7 Watt DC-DC Converters Wide input voltage ranges up to 75 V DC 1 or 2 outputs up to 48 V DC 1500 V DC I/O electric strength test voltage • Magnetic feedback for single output models • Short circuit protection • Industry standard 2" x 1" case with 10.5 mm profile Selection chart Output 1 Output 2 Input voltage Type Uo nom Io nom Uo nom Io nom Ui [V DC] [mA] [V DC] [mA] [V DC] 3.3 1200 14...36 24 IMS 7-03-9 3.3 1200 36...75 48 IMS 7-03-9 5.1 1200 14...36 24 IMS 7-05-9 5.1 1200 36...75 48 IMS 7-05-9 12 600 14…36 24 IMS 7-12-9C 12 600 36…75 48 IMS 7-12-9C 15 480 14…36 24 IMS 7-15-9C 15 480 36…75 48 IMS 7-15-9C 5 700 5 700 14...36 24 IMS 7-05-05-9 5 700 5 700 36...75 48 IMS 7-05-05-9 12 300 12 300 14...36 24 IMS 7-12-12-9 12 300 12 300 36...75 48 IMS 7-12-12-9 15 240 15 240 14...36 24 IMS 7-15-15-9 15 240 15 240 36...75 48 IMS 7-15-15-9 24 150 24 150 14...36 24 IMS 7-24-24-9 24 150 24 150 36...75 48 IMS 7-24-24-9 1 For minimum order quantities and lead times contact Power-One. 2 Option M, C, L and Z exclude each other. Options 1, 2 M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z M, C, L, Z www.power-one.com Edition 3/04.2001 1 Board Mountable Input Input voltage range 24 IMS 7 48 IMS 7 IMS 7 Series 14...36 V DC 36...75 V DC Output Output voltage setting accuracy Ui nom , 50% lo nom , single output models ±1% Uo nom Ui nom , 50% lo nom, double output, main/aux. output ±1.5 % Uo nom Minimum load recommended for double output models 10% lo nom Line/load regulation Ui min...Ui max, 50% lo nom , single output models ±1% Uo nom Line regulation Ui nom , 50% lo nom, double output models, main output ±1% Uo nom Load regulation Ui nom , 10...100% lo nom, double output models ± 3% Uo nom tracking output ± 3% Uo nom Output voltage switching noise Ui nom , 0...100% lo nom , peak-peak, total max. 1.5% Uo nom Efficiency Ui nom , lo nom up to 84% Control and protection Input protection Overload protection No-load protection Remote shut down Trim input for Uo suppressor diode Ui min...Ui max, any load fully protected, hiccup mode yes TTL-compatible inhibit input disabled with ≥ 2.4 V yes Safety and EMC Electric strength test voltage Electromagnetic interference I/O 1500 V DC class B Environmental Operating ambient temperature Storage temperature Relative humidity MTBF Ui nom, lo nom non operational non condensing GB 40 °C, MIL-HDBK-217F, N2 –40...71°C –40...100 °C 93% 1'650'000 h Options SMD version SMD version Open frame version C-pinout with pins with PCB lid M L Z C Accessories DIN and chassis mounting bracket www.power-one.com Edition 3/04.2001 2 IMS 7 Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 7 Watt DC-DC Converters European Projection IMS 7 S09030 50.8 (2") 3.4 (0.13") 3.81(0.15") 0.8 × 1.2 (0.03 x 0.05") Pins ∅ 1.6 (0.06) PCB holes 3 x 5.08 (0.2") 3.81(0.15") 4 3.81(0.15") 10 4.6 (0.18") Measuring point of case temperature TC 45.7 (1.8") PT 2.2 self tapping screws 1.27 (0.05") IMS 7 (option Z) S90002 48 (1.9") 1 3 x 5.08 (0.2") 4 3.5 (0.14") 43.2 (1.7") 10 1.2 (0.5") IMS 7 (option C) 09032 50.8 (2") 35.5 (1.4") 0.5(0.02") 15.2 (0.6") ∅ 1(0.04") 1 2 4 5 20.3 (0.8") 25.4 (1") 5.8 (0.2") 3 8.25 (0.32") ∅ 1 (0.04") Pins ∅ 1.2 (0.05") PCB holes 12.5 (0.49") Measuring point of case temperature TC 3.4 (0.13") 23 (0.9") 5 x 3.81 (0.15") 14 25.4 (1") 1 20.3 (0.8") 5 x 3.81 (0.15") 14 www.power-one.com Edition 3/04.2001 3 Board Mountable IMS 7 SMD version (option M) 3 x 5.08 (0.2") 50.8 (2") 14 IMS 7 Series 0.8 × 1.2 (0.03 x 0.05") Pins 3.81(0.15") 4 42.4 (1.67") Measuring point of case temperature TC 10 S09031 4.2 (0.17") IMS 7 SMD version (option L) 50.8 (2") 18 25.4 (1") 1 5 x 3.81 (0.15") Foot print 1 Pin allocation IMS 7, option M and Z Pin 1 2 3 4 10 11 12 13 14 Single output Vi+ Vi– i n.c. Vo– Vo+ Vo– R n.c. Dual output Vi+ Vi– i R (Trim) Vo1– Vo1+ Vo2– Vo2+ n.c. SMD version (option L) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Single output Vo Go n.c. n.c. n.c. n.c. n.c. n.c. n.c. n.c. i no pin no pin n.c. n.c. n.c. Vi– Vi+ Dual output Vo1 Go Vo2 n.c. n.c. n.c. n.c. n.c. Trim n.c. i no pin no pin n.c. n.c. n.c. Vi– Vi+ C pinout (option C) Pin 1 2 3 4 5 Single output Vi+ Vi– Vo+ no pin Vo– Dual output Vi+ Vi– Vo+ Go Vo– 10.5 (0.41") Measuring point of case temperature TC 90001 8 x 5 (1.9") www.power-one.com Edition 3/04.2001 2.8 (0.11") 24 (0.94") 25.4 (1") 3.6 (1.4") 4