2980047-01

Handtools Tooling multi-functional hand tools 2980019-01-B Professional handtool for use with hardened die sets. The combi die set for shielded plugs also accepts ferrule crimping dies. For the longterm and large cable assembly. Platens: A B C * * Suitable dies for tool 2980019-01: *combi die set 2980021-01 accepts ferrule inserts, order ferrule inserts seperately to suit cable O/D (e.g. 2980035-01 for 6mm O/D cable) combi die 8 STP part-no. 2980021-01 ferrule insert outer cable-O 2980034-01 max. 3,7mm 2980022-01 max. 4,5mm 2980023-01 max. 5,2mm 2980035-01 max. 6,0mm 2980042 Simple table fixture for easier handling. * Warning !!! Tool Die Platens will be damaged if Unshielded Die Sets are used for Shielded Plugs. The Shielded Plugs only require platen “A”, the Cat 5 USTP & the 2PC Plugs only require platens “A” & “C” Tooling multi-functional hand tools 2980070-01 & 2980075-01 Professional Handtool for the assembly of shielded Cat 6 plugs. This is a real One-Step tool: contacts and shield is crimped at the same time. Completet handtool and die-set discrete die-set multi-functional hand tools 2980028-01-B Ferrule Handtool for the assembly of shielded SCS plugs (CAT3/CAT5/CAT5+). The ferrule insert can be easily exchanged for the individual cable diameters. Outer cable-Ø part-no. max. 3,7 mm 2980029-01 max. 4,5 mm 2980030-01 max. 5,2 mm 2980031-01 max. 6 mm 2980032-01 max. 6,5 mm 2980065-01 Suitable dies for tool 2980028-01: 2980050-01 & 2980055-01 Professional Handtool for the assembly of shielded Voice-Series™ plugs ( V-P-88-S). This is a real One-Step tool: contacts and shield is crimped at the same time. Outer shield-Ø part-no. max. 5,7 mm 2980050-01 max. 6,4 mm 2980055-01 2940011-01 Wire cutter made of stainless ´Solingen´-steel for cutting wires at the assembly of shielded SCS plugs and Cable jacks. Tooling Tooling multi-functional hand tools Die Platens Loaded 2980027-01 & 2980033-01 Contacts A Outer Jacked Strain Relief C Note:- The above tools do not crimp the inner conductor strain relief situated immediately after the contact blade platen 2980027-01 simple and cheap multi-functional hand tools including stripper and cutter to assemble 4-, 6-, MMJ 6- and 8- pole modular plugs. 2980033-01 same as tool above but with 10-pole instead of 8-pole insert. 2980040-01 Professional ratched handtool with fixed die set included. For assembly of all Stewart Connector CableJacks. . part-no. SS-800810-xxx SS-800810SB-xxx SS-801010-xxx SS-801010SB-xxx Suitable Cable Jacks for tool 2980040-01: Bench-Mount Press Tooling 2980100-01 This table mount tool is a low-cost alternative for semi quantity assemblies. Unique features like: - adjustable/turnable insert - adjustable lever force - ShureStake principle for reliable results - spring supportet lever goes back to start position automatically - sensitive feedback about final crimp position - same inserts like for 2980019-01 - all frame parts are made of hardened steel - 1 year warranty Inserts for Bench-Mount Press to be used with professional crimping bench-mount-press above 4 different sizes for cable diameters Easily exchangeable suitable sub-inserts part-no. 2980060-01 2980061-01 2980062-01 2980063-01 2980064-01 description main sub-insert sub-insert sub-insert sub-insert die set for Ø3,7 mm for Ø4,5 mm for Ø5,2 mm for Ø6,0 mm marking I stripe II stripe III stripe IIII stripe Puch-Down Tool 298HT900 Punch-Down Tool for use together with our VoiceSeries PunchDownBlocks (e.g. V-PDB-8). Supplied together with a belt-case. Tooling ECP1500 Crimp-Press Tooling - The electric Crimp-Press is an extremly versatile crimp machine. - The ECP1500 is deliverable with and without a tester for conductivity and short circuit. - It is able to use the standard die sets. - Fast cycle time allows approx. 800 pieces per hour. - The connecting cables can be crimped together in one operation with simultaneous test for conductivity and short circuit. - The crimping cycle including test takes approx. 1,3 sec.