940-SP-3066

Modular Plugs 30 Series • Unshielded Variations .109 [2.77] .232 [5.89] .485 [12.32] Two-Contact, Six-Position .525 [13.33] .232 [5.89] .534 [13.57] Four-Contact, Six-Position .109 [2.77] .045 [1.14] SS .380 [9.65] .096 [2.44] .015 [0.38] .040 [1.02] SS .260 [6.60] Six-Contact, Six-Position Unshielded K2-Key RMK4-Key .045 [1.14] .286 [7.26] REF. .096 [2.44] .300 [7.62] Keying Options K1-Key .525 [13.33] SS Radius Back (R) for round cable 4-position .135 [3.42] 6-position .135 [3.42] 8-position .172 [4.37] 10-position .172 [4.37] Open Back (OB) for oversized cable 4-position .144 [3.66] 6-position .144 [3.66] 8-position .190 [4.83] 10-position .190 [4.83] .040 [1.02] .286 [7.26] REF Standard Back for flat/oval cable 4-position .110 [2.79] 6-position .103 [2.62] 8-position .142 [3.61] 10-position .142 [3.61] Four-Contact, Four-Position Unshielded .260 [6.60] Cable Openings OST (MMJ) SS Quick Reference Chart Fill Cutout Description Series Contacts Inserted Contact Positions 30 30 30 30 4 2 4 6 4 6 6 6 30 8 8 30 10 10 Special Length .662 [16.80] Longer body is ideal for overmolding. Provides more surface area for disconnect/reconnect. 2 RJ-45** RJ-11** .232 [5.89] .109 [2.77] .286 [7.26] REF .096 [2.44] .045 [1.14] .030 [0.76] .652 [16.56] Options Special* Flexible* Wire Management* Keying Options Systems Length Strain (.652) Relief K1 K2 RMK4 OST Mgmt. Load (MMJ) Boot Bar Bar • • • • • • • • • • • *Consult Stewart for specific details. **Typical applications. Note: Configurations shown are the most common for typical applications. For availability of other configurations not listed, consult Stewart. All dimensions are in inches with metric values in brackets. Information subject to change without notice. To obtain drawings and current specifications, contact Stewart Connector Systems, Inc. 11118 Susquehanna Trail South, Glen Rock, PA 17327-9199. Telephone: 717-235-7512. FAX: 717-235-7954. http://www.stewartconnector.com • • • • • 30 Series Modular Plugs • Unshielded Variations Eight-Contact, Eight-Position Unshielded Management Systems .312 [7.92] .885 [22.48] .845 [21.46] .040 [1.02] .232 [5.89] .109 [2.77] .096 [2.44] SS .045 [1.14] .532 [13.51] .286 [7.26] REF .260 [6.60] Management Bar Load Bar .622 [15.80] .460 [11.68] Ten-Contact, Ten-Position Unshielded .312 [7.92] .260 [6.60] .885 [22.48] .845 [21.46] .040 [1.02] .532 [13.51] .232 [5.89] .622 [15.80] .109 [2.77] .460 [11.68] .096 [2.44] .045 [1.14] SS .286 [7.26] REF Flexible Strain Relief Boot Plating Styles How to Order Double Selective Plate (DS) EXAMPLE: 940 – 30 – SP – 30 8 Contact styles • 937 for stranded conductor • 940 for solid conductor Plating options (microinches Au) • Leave blank for standard 50 • 06, 15, or 30 - Optional Plating styles • SP - Selective plate • DS - Double selective plate Series number Note: For information on tooling, see pages 92-94. All dimensions are in inches with metric values in brackets. 8 R – K1 – X Other options (consult Stewart) Keying options • K1, K2, RMK4, OST (MMJ) Cable openings • Leave blank for standard back opening • R - radiused back • OB - open back Number of contact positions • 4, 6, 8, or 10 Number of contacts inserted • 2, 4, 6, 8, or 10 CONTACT AREA Ni 100 MICROINCHES MINIMUM OVERALL ,, ,, ,, Selective Plate (SP) CONTACT AREA INDICATES PLATING ON TOP SURFACE. (AVAILABLE IN 50 OR 30 µIN. Au IN DS STYLE AND 50, 30, 15 AND 6 µIN. Au IN SP STYLE. BOTH WITH 3 µIN. FLASH UNDERPLATING.) INDICATES PLATING AREA ON BOTTOM SURFACE. (AVAILABLE IN 3 MICROINCHES Au ONLY, BOTH SIDES.) Information subject to change without notice. To obtain drawings and current specifications, contact Stewart Connector Systems, Inc. 11118 Susquehanna Trail South, Glen Rock, PA 17327-9199. Telephone: 717-235-7512. FAX: 717-235-7954. http://www.stewartconnector.com 3