ACC600-1T24

VPS600 The ACC600 Series of open frame power supplies feature a wide universal AC input range of 85 – 264 VAC, offering up to 600 W of output power with convection cooling (U-Channel), in a compact footprint, with a variety of single output voltages. The high efficiency and high power density of the ACC series ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications. • • • • • • • • • • • • • • 5 x 8.5 x 1.61 Inch Form Factor (127 x 216 x 41 mm) Convection Cooling Rated Universal Input Current Sharing Option Peak Power Capability 5 VDC Stand by output 12 V fan output Power Good / Power Fail Signal Suitable in POE applications Lesser than 1U high High voltage output range up to 58 VDC N+1 redundant power supply Single wire current sharing Built in OR-ing diode / FET (- R suffix) • Instrumentation • Renewable Energy • Lighting • Test and Measurement • Industrial Applications • Robotics • Applied Computing • Wireless Communication ACC600 Series 2 ACC600-1T12 ACC600-1T12-H ACC600-1T12-P ACC600-1T15 ACC600-1T15-H ACC600-1T15-P ACC600-1T24 ACC600-1T24-H ACC600-1T24-P ACC600-1T30 ACC600-1T30-H ACC600-1T30-P ACC600-1T48 ACC600-1T48-H ACC600-1T48-P ACC600-1T58 ACC600-1T58-H ACC600-1T58-P 1 2 12 V 15 V 24 V 30 V 48 V 58 V U-Channel U-Channel + Slotted Cover U-Channel + Plain Cover U-Channel U-Channel + Slotted Cover U-Channel + Plain Cover U-Channel U-Channel + Slotted Cover U-Channel + Plain Cover U-Channel U-Channel + Slotted Cover U-Channel + Plain Cover U-Channel U-Channel + Slotted Cover U-Channel + Plain Cover U-Channel U-Channel + Slotted Cover U-Channel + Plain Cover 25 A 17.5 A 15 A 25 A 17.5 A 15 A 25 A 17.5 A 15 A 20 A 14 A 12 A 12.5 A 8.75 A 7.5 A 10.34 A 7.25 A 6.2 A 0.0 A 2% 0.0 A 2% 0.0 A 2% 0.0 A 2% 0.0 A 2% 0.0 A 2% To order product without the redundancy diode option please add the suffix-Sxxx to your required part number. Please contact the factory for availability. For Ripple measurement minimum output power requirement is 25 W. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Electrolytic capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Specifications are for nominal input voltage, 25°C unless otherwise stated. Input Voltage Universal Input Frequency 85 – 264 VAC / 120 – 390 VDC 47 – 63 Hz Input Current 120 VAC: 240 VAC: 6.5 A max. 3.2 A max. Input Protection In Live & Neutral both F16 A / 250 V No Load Power Over entire input range with main output kept OFF using Remote ON/OFF 3 W typ. Inrush Current 240 VAC: 25 A max. Leakage Current 240 VAC / 50 Hz 400 µA Touch Current: Power Factor Switching Frequency < 100 µA 120 VAC: 240 VAC: PFC converter: Variable Resonant converter: Variable 0.98 0.95 85 kHz typical 100 kHz typical tech.support@psbel.com ACC600 Series Output Voltage 3 Refer to Model Selection table for details 12 V to 58 V Standby Output Voltage 3 Output Power 4 Convection Cooled Peak Power For 1 ms 120 VAC: 240 VAC: 120 VAC / 240 VAC: Efficiency Hold-up Time 5V 600 W 420 W 360 W 720 W 88% Typical 93% 8 ms U-Channel U-Channel + Slotted Cover U-Channel + Plain Cover Line Regulation ± 0.5% Load Regulation Output Voltage Adjustment ± 1.0% < 10%, recovery time < 5 ms ± 3% Set Point Tolerance ± 1% Transient Response 50% to 100% load change, 50 Hz, 50% duty cycle, 0.1 A/μs Rise Time