RND02ZGE

Product Specifications RND Series: 8-10W DC/DC Converters Nov 2001 38-75V Input 3.3V & 5.0V, ±12V Dual Outputs (±15V, available with trimming) Features • • • • • • • • • • • • Single board design Synchronization function Low profile – 8.5 mm height Excellent co-planarity Input/output isolation: 1500 Vdc Convection cooling Low conducted and radiated EMI Output overcurrent protection Remote on/off (primary referenced) W ide output voltage trim adjust, positive or negative Operating temperature to 110°C rd UL, CSA and EN/IEC60950 (3 ed.) approved Applications • • • • Distributed power architectures Telecommunications equipment LAN/WAN applications Data processing Description The RND series of converters are industry standard, 2” x 1” size, low profile, dual output, DC/DC converters intended for SMT placement and reflow soldering. The product provides on-board conversion of standard telecom, datacom and industrial input voltages to isolated low output voltages without the need for any additional cooling. Proprietary patented manufacturing process ensures optimal quality through full process automation. The converters are cost effective high performance alternatives to competing products on the market. Selection Chart Model Input voltage range, Vdc 38-75 36-75 Input current, max Adc 0.4 0.4 Output voltage, Vdc 3.27 5.20 12.0 12.0 Output rated current, Adc 1.0 1.0 0.42 0.42 Output ripple and noise, mVp-p 50 50 50 50 Efficiency, % 81 85 RND02ZGE-M6 RND0.8ZHH-M6 5-Nov-01 Rev 1.1 www.power-one.com Page 1 of 14 Product Specifications RND Series: 8-10W DC/DC Converters Nov 2001 38-75V Input 3.3V & 5.0V, ±12V Dual Outputs (±15V, available with trimming) Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long term reliability and cause permanent damage to the converter. Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Input voltage (Vin) Transient Input Voltage (Vint) Operating CaseTemp. (Tc) Storage Temperature (Ts) ON/OFF Control Voltage (Vrc) Conditions/Description Continuous Transient, 100ms All operating conditions Referenced to -Vin Min 36/38 -45 -55 -5 Max 75 100 110 125 16 Units Vdc Vdc °C °C Vdc Environmental and Mechanical Specifications Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Shock IEC68-2-27 100 g Sinusoidal Vibration IEC68-2-6 10 g W eight 0.6/17 oz/g W ater Washing Standard process Yes MTBF Per Bellcore TR-NWT-000332 2,500 kHrs Isolation Specifications Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Insulation Safety Rating Operational Isolation Voltage (Vps) 1,500 Vdc Isolation Resistance (Rps) 10 MOhm Isolation Capacitance (Cps) 2,200 pF Input Specifications Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Input Voltage (Vin) Continuous 36 (38) 48 75 Vdc Input Current when Shutdown Vin.Nom, Remote Control 3 mAdc activated Input Current No Load Vin.Nom, Io = 0 10 mAdc Turn-On Input Voltage 36-75 Vin Ramping Up, Io.Max 32 34.5 36 Vdc Turn-Off Input Voltage 36-75 Vin Ramping Down, Io.Max 30 33.5 35 Vdc Turn-On Input Voltage 38-75 Vin Ramping Up, Io.Max 34 36.5 38 Vdc Turn-Off Input Voltage 38-75 Vin Ramping Down, Io.Max 30 34.5 36 Vdc Turn-On Time To Output Regulation Band 250 400 ms After Remote Control 25 ms Rise Time 5 ms Input Reflected Ripple Current Vin.Max, Io.Max 30 mAp-p Input Capacitance 1.4 µF 5-Nov-01 Rev 1.1 www.power-one.com Page 2 of 14 Product Specifications RND Series: 8-10W DC/DC Converters Nov 2001 38-75V Input 3.3V & 5.0V, ±12V Dual Outputs (±15V, available with trimming) Output Specifications All specifications apply over input voltage, output load and temperature range, unless otherwise noted. RND03ZGE: (Vo1) 5.2V/1.0A Parameter Output Voltage Setpoint Accuracy Output Current * Line Regulation Load Regulation Cross Regulation Dynamic Regulation Peak Deviation Settling Time Output Voltage Ripple Admissible Load Cap. Output Current Limit Threshold Switching Frequency Temperature Coeff. Trim Range Vo Io Conditions/Description Vin.Nom, Io1 = 0.6A, Io2 = 0.9A, 25°C Vin.Min to Vin.Max Vin.Min to Vin.Max, 50% Io.Max Vin.Nom, Io.Min to Io.Max Io1 =1.0A, Io2 Min to Max, measure ∆Vo1 25-75% Io.Max load step change. to 1% error band Vin.Min to Vin.Max, Io.Min to Io Max, 20MHz Bandwidth Io.Max, Vin.Nom Vout ≤0.90 Vo.Nom, both outputs set to Icl Vin.Nom, Io.Max Io.Min to Io.Max, Vin.Min to Vin.Max Min 5.08 0.1 120 Nom 5.2 Max 5.24 1.0 50 220 130 200 300 100 2,200 150 380 4.43 0.02 5.95 Units Vdc Adc mV mV mV ± mV µs mVp-p µF %Io.Max kHz %Vo/°C Vo Vr Comax Icl Fs Tco Vt 50 110 RND03ZGE: (Vo2) 3.27V/1.0A Parameter Output Voltage Setpoint Accuracy Output Current * Line Regulation Load Regulation Cross Regulation Dynamic Regulation Peak Deviation Settling Time Output Voltage Ripple Admissible Load Cap. Output Current Limit Threshold Switching Frequency Temperature Coeff. Trim Range Vo Io Conditions/Description Vin.Nom, Io1 = 0.6A, Io2 = 0.9A, 25°C Vin.Min to Vin.Max Vin.Min to Vin.Max, 50% Io.Max Vin.Nom, Io.Min to Io.Max Io2 =1.0A, Io1 Min to Max, measure ∆Vo2 25-75% Io.Max load step change. to 1% error band Vin.Min to Vin.Max, Io.Min to Io Max, 20MHz Bandwidth Io.Max, Vin.Nom Vout ≤0.90 Vo.Nom, both outputs set to Icl Vin.Nom, Io.Max Min 3.24 0.1 100 Nom 3.27 Max 3.3 1.0 40 210 90 200 300 100 3,300 150 380 0.02 3.8 Units Vdc Adc mV mV mV ± mV µs mVp-p µF %Io.Max kHz %Vo/°C Vo Vr Comax Icl Fs Tco Vt 50 110 Io.Min to Io.Max, Vin.Min to 2.8 Vin.Max * At Iout