RNS02ZG-M6

Product Specifications RNS Series: 5-10W DC/DC Converters Nov 2001 18-72 & 38-75V Input 3.3V, 5.0V, 7.0V and 12V Outputs (Outputs of 2.5V & 15V, available with trimming) Features • • • • • • • • • • • • • Single board design Synchronization function Low profile – 8.5 mm height Excellent co-planarity Input/output isolation: 1500 Vdc Convection cooling Low conducted and radiated EMI W ide input range Output overcurrent protection Remote on/off (primary referenced) Output voltage trim adjust, positive or negative Operating temperature to 110°C rd UL, CSA and EN/IEC60950 (3 ed.) approved Applications • • • • Distributed power architectures Telecommunications equipment LAN/WAN applications Data processing Description The RNS series of converters are industry standard, 2” x 1” size, low profile, single output, DC/DC converters intended for SMT placement and reflow soldering. The product provides on-board conversion of a wide range of standard telecom, datacom and industrial input voltages to isolated low output voltages without the need for any additional cooling. Proprietary patented manufacturing process ensures optimal quality through full process automation. The converters are cost effective high performance alternatives to competing products on the market. Selection Chart Model RNS01EE-M6 RNS03ZE-M6 RNS01EG-M6 RNS02ZG-M6 RNS0.9ET-M6 RNS0.6ZH-M6 Input voltage range, Vdc 18-72 38-75 18-72 38-75 18-72 38-75 Input current, max Adc 0.5 0.4 0.5 0.4 0.5 0.3 Output voltage, Vdc 3.30 3.30 5.05 5.05 7.00 12.0 Output rated current, Adc 1.5 3.0 1.2 2.0 0.9 0.6 Output ripple and noise, mVp-p 25 50 25 50 25 40 Efficiency, % 78 79 79 83 80 83 2-Nov-01 Rev 1.1 www.power-one.com Page 1 of 16 Product Specifications RNS Series: 5-10W DC/DC Converters Nov 2001 18-72 & 38-75V Input 3.3V, 5.0V, 7.0V and 12V Outputs (Outputs of 2.5V & 15V, available with trimming) Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long-term reliability and cause permanent damage to the converter. Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Input voltage (Vin) Transient Input Voltage (Vint) Operating CaseTemp. (Tc) Storage Temperature (Ts) ON/OFF Control Voltage (Vrc) Conditions/Description Continuous (RNS01EE/RNS01EG/RNS0.9ET) Continuous (RNS03ZE/RNS02ZG/RNS0.6ZH) Transient, 100ms All operating conditions Referenced to -Vin Min (18) 38 -45 -55 -5 Max (72) 75 100 110 125 16 Units Vdc Vdc Vdc °C °C Vdc Environmental and Mechanical Specifications Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Shock IEC68-2-27 100 g Sinusoidal Vibration IEC68-2-6 10 g W eight 0.6/17 oz/g W ater Washing Standard process Yes MTBF Per Bellcore TR-NWT-000332 2,500 kHrs Isolation Specifications Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Insulation Safety Rating Operational Isolation Voltage (Vps) 1,500 Vdc Isolation Resistance (Rps) 10 MOhm Isolation Capacitance (Cps) 2,200 pF Input Specifications Specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Continuous (4:1 input range) (18) (48) (72) Input Voltage (Vin) Vdc Continuous (standard input range) 38 48 75 Input Current when Shutdown Vin.Nom, Remote Control 3 mAdc activated Vin.Nom, Io = 0 (4:1 range) (30) Input Current No Load mAdc Vin.Nom, Io = 0 (std input range) 10 Turn-On Input Voltage 18-72 Vin Ramping Up, Io.Max 16.5 17.5 18 Vdc Turn-On Input Voltage 38-75 Vin Ramping Up, Io.Max 34 36 38 Vdc Turn-Off Input Voltage 18-72 Vin Ramping Down, Io.Max 15.5 16 16.5 Vdc Turn-Off Input Voltage 38-75 Vin Ramping Down, Io.Max 30 33 36 Vdc Turn-On Time To Output Regulation Band 250 400 ms After Remote Control 25 ms Rise Time 5 ms Input Reflected Ripple Current Vin.Max, Io.Max 30 mAp-p Input Capacitance 1.4 µF 2-Nov-01 Rev 1.1 www.power-one.com Page 2 of 16 Product Specifications RNS Series: 5-10W DC/DC Converters Nov 2001 18-72 & 38-75V Input 3.3V, 5.0V, 7.0V and 12V Outputs (Outputs of 2.5V & 15V, available with trimming) Output Specifications All specifications apply over input voltage, output load and temperature range, unless otherwise noted. RNS01EE : 3.3V/1.5A Parameter Output Voltage Setpoint Accuracy Output Current Line Regulation Load Regulation Dynamic Regulation Peak Deviation Settling Time Output Voltage Ripple Admissible Load Capacitance Output Current Limit Threshold Switching Frequency Temperature Coefficient Trim Range Vo Io Conditions/Description Vin.Nom, Io = 1.5A, 25°C Vin.Min to Vin.Max Vin.Min to Vin.Max, 50% Io.Max Vin.Nom, Io.Min to Io.Max 50-100% Io.Max load step change. to 1% error band Vin.Min to Vin.Max, Io.Min to Io Max, 20MHz Bandwidth Io.Max, Vin.Nom Vout ≤0.90 Vo.Nom Vin.Nom, Io.Max Io.Min to Io.Max, Vin.Min to Vin.Max 2.75 Min 3.27 0.15 25 35 Nom 3.30 Max 3.33 1.5 50 70 300 300 50 2,200 110 410 0.02 3.85 150 Units Vdc Adc mV mV ± mV µs mVp-p µF %Io.Max kHz %Vo/°C Vo Vr Comax Icl Fs Tco Vt 25 RNS01EE Characteristic curves Vout (V) 4.00 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 Vin Min Vin Nom Vin Max Output Voltage Vs Load Efficiency 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% Efficiency Vs Load Vin Min Vin Nom Vin Max 0.00 0.08 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50 Iout (A) 0.00 0.23 0.45 0.68 0.90 1.13 1.35 1.58 1.80 2.03 2.25 2.48 2.70 Iout (A) 2-Nov-01 Rev 1.1 www.power-one.com 2.93 Page 3 of 16 Product Specifications RNS Series: 5-10W DC/DC Converters Nov 2001 18-72 & 38-75V Input 3.3V, 5.0V, 7.0V and 12V Outputs (Outputs of 2.5V & 15V, available with trimming) Output Specifications All specifications apply over input voltage, output load and temperature range, unless otherwise noted. RNS03ZE : 3.3V/3.0A Parameter Output Voltage Setpoint Accuracy Output Current * Line Regulation Load Regulation Dynamic Regulation Peak Deviation Settling Time Output Voltage Ripple Admissible Load Capacitance Output Current Limit Threshold Switching Frequency Temperature Coefficient Trim Range Vo Io Conditions/Description Vin.Nom, Io = 2.0A, 25°C Vin.Min to Vin.Max Vin.Min to Vin.Max, 50% Io.Max Vin.Nom, Io.Min to Io.Max 25-75% Io.Max load step change. to 1% error band Vin.Min to Vin.Max, Io.Min to Io Max, 20MHz Bandwidth Io.Max, Vin.Nom Vout ≤0.90 Vo.Nom Vin.Nom, Io.Max Min 3.27 0.3 Nom 3.30 Max 3.33 3.0 50 120 300 300 70 15,000 110 400 0.02 140 Units Vdc Adc mV mV ± mV µs mVp-p µF %Io.Max kHz %Vo/°C Vr Comax Icl Fs Tco Vt 50 Io.Min to Io.Max, Vin.Min to 2.3 4.0 Vo Vin.Max * At Iout