SLIN-03F2ALG

NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 SLIN-03F2Ax RoHS Compliant Rev.B Features • Wide Input Voltage Range • Over Temperature Protection • Output Voltage Programmable • Output Over Current Protection • Fixed Switching Frequency • Ability to Sink and Source Current • Remote On/Off • Cost Efficient Open Frame Design • Remote Sense • Tunable LoopTM (a registered trademark of Lineage Power Systems) to Optimize Dynamic output voltage response • Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592) • Compliant to RoHS EU Directive 2002/95/EC • UL* 60950-1 Recognized, CSA† C22.2 No. 60950-1-03 Certified • VDE‡ 0805:2001-12 (EN60950-1) Licensed Applications • • • Distributed power architectures Intermediate bus voltage applications Telecommunications equipment • • • Servers and storage applications Networking equipment Industrial equipment Description The SLIN-03F2Ax power modules are non-isolated dc/dc converters that can deliver up to 3A of output current. These modules operate over a wide range of input voltage (VIN = 2.4Vdc-5.5Vdc) and provide a precisely regulated output voltage from 0.6Vdc to 3.63Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current protection, and over temperature protection. A new feature, the Tunable LoopTM, allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. Part Selection Output Voltage Input Voltage 0.6 Vdc - 3.63 Vdc 2.4 Vdc - 5.5 Vdc Max. Output Current 3A Typical Efficiency 91% Model Number Active High SLIN-03F2A0 Model Number Active Low SLIN-03F2AL Notes: Add “G” suffix at the end of the model number to indicate Tray Packaging. Part Number Explanation S LIN – 03 F 2A 0 1 2 3 4 5 6 1---Surface mount 2---Series code 3---Output current (3A) 4--- Wide input voltage range (2.4-5.5V) 5--- Wide output voltage range (0.6-3.63V) 6--- Enable, active high, change “0” to “L” means active low Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 1 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 Absolute Maximum Ratings Min Typ Max Unit Continuous Input Voltage -0.3 - 6 V Operating Ambient Temperature -40 - 85 °C Storage Temperature -55 - 125 °C Parameter Notes Note: Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Input Specifications Parameter Operating Input Voltage Min 2.4 Typ - Max 5.5 Unit V Input Current (full load) - - 3.5 A - 26 - mA VIN=5.0V, Vo=0.6V, IO=0, module enabled - 75 - mA VIN=5.0V, Vo=3.3V, IO=0, module enabled - 2.1 - mA VIN = 5V, module disabled 5Hz to 20MHz, 1μH source impedance; VIN =0 to 5.5V, IO= IOmax Input Current (no load) Input Stand-by Current Input Reflected Ripple Current (pk-pk) - 25 - mA I2t Inrush Current Transient - - 1 A2s Input Ripple Rejection (120Hz) - 40 - dB Turn-on Threshold - - 2.2 V Turn-off Threshold 1.75 - - V Hysteresis 0.08 - 0.2 V Notes VIN=2.4V to 5.5V, IO=IO, max CAUTION: This converter is not internally fused. An input line fuse must be used in application. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 5A. Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. Note: Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 2 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 Output Specifications Parameter Min Typ Max Unit Output Voltage Set Point -1.5 - +1.5 %Vo,set Output Voltage -3.0 - +3.0 %Vo,set Adjustment Range 0.6 - 3.63 V Remote Sense Range - - 0.5 V Output Regulation (for VO ≥ 2.5Vdc) - - 0.4 %Vo,set - - 10 mV Load Regulation, IO=IO, min to IO, max Output Regulation (for VO < 2.5Vdc) - - 10 mV Line Regulation, VIN=VIN, min to VIN, max - - 5 mV Load Regulation, IO=IO, min to IO, max Temperature Regulation - - 0.4 %Vo,set Ripple and Noise (pk-pk) - 20 35 mV Ripple and Noise (rms) - 15 25 mV Output Current Range 0 - 3 A Output DC Current Limit - - 200 %Io,max Output Short-Circuit Current - 0.12 - A Vo≤250mV, Hiccup Mode Output Capacitance ESR≥ 1 mΩ ESR≥0.15 mΩ ESR≥ 10 mΩ 0 0 0 - 47 1000 3000 uF uF uF Without the Tunable LoopTM With the Tunable LoopTM With the Tunable LoopTM - 2 - mS Case 1: On/Off input is enabled and then input power is applied (delay from instant at which VIN = VIN, min until Vo =10% of Vo, set) Turn-On Delay Time Notes with 0.5% tolerance for external resistor used to set output voltage Over all operating input voltage, resistive load, and temperature conditions until end of life selected by an external resistor Line Regulation, VIN=VIN, min to VIN, max Tref=TA, min to TA, max 5Hz to 20MHz BW, VIN=VIN, nom and IO=IO, min to IO, max, Co = 0.1μF // 10 μF ceramic capacitors Hiccup Mode - 2 - mS Case 2: Input power is applied for at least one second and then the On/Off input is enabled (delay from instant at which Von/Off is enabled until Vo =10% of Vo, set) Output voltage Rise time - 5 - mS time for Vo to rise from 10% of Vo, set to 90% of Vo, set Output voltage overshoot - - 3 %Vo Vin=Vin, min to Vin, max, Io=Io, max, With or without maximum external capacitance Dynamic Load Response △V0%~50% of Max Load △V50%~0% of Max Load Peak Deviation - 90 - mV Settling Time - 20 - uS Peak Deviation - 100 - mV Settling Time - 20 - uS di/dt=10A/us, Vin=5V, Vo=1.5V, Ta=25°C, Co=0 Note: Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 3 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 General Specifications Parameter Min Typ Max Unit - 81.2 89.4 91.4 93.9 94.4 - % % % % % Switching Frequency - 600 - kHz Over Temperature Protection - 140 - °C Weight - 1.55 - g Notes Efficiency Vo=0.6V Vo=1.2V Vo=1.8V Vo=2.5V Vo=3.3V MTBF 16,139,760 hours 0.48 x 0.48 x 0.246 12.19 x 12.19 x 6.25 - Vin= 3.3Vdc, Ta=25°C Io=Io, max , Vo= Vo,set Vin=5.0V, when Vo=3.3V Calculated MTBF (Io=80% full load, Ta=40deg C) Telcordia Issue 2, Method I Case 3 Dimensions Inches (L × W × H) Millimeters (L × W × H) Note: Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 4 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 Efficiency Data 95 86 84 90 EFFICIENCY, η (%) EFFICIENCY, η (%) 82 80 Vin=3.3V 78 Vin=2.4V Vin=5.5V 76 74 72 70 85 80 Vin=2.4V 75 70 0 0.5 1 1.5 2 2.5 3 0 0.5 OUTPUT CURRENT, IO (A) 1 1.5 2 2.5 3 OUTPUT CURRENT, IO (A) Vo=0.6V Vo=1.2V 95 100 95 Vin=5.5V Vin=3.3V 85 EFFICIENCY, η (%) 90 EFFICIENCY, η (%)) Vin=5.5V Vin=3.3V Vin=2.4V 80 75 90 Vin=5.5V Vin=3.3V 85 Vin=3V 80 75 70 70 0 0.5 1 1.5 2 2.5 3 OUTPUT CURRENT, IO (A) 0 0.5 1 1.5 2 2.5 3 OUTPUT CURRENT, IO (A) Vo=1.8V Vo=2.5V 100 EFFICIENCY, η (%)) 95 90 Vin=5.5V Vin=5V 85 Vin=4V 80 75 70 0 0.5 1 1.5 2 2.5 3 OUTPUT CURRENT, IO (A) Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 5 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 3.5 3.5 3 3 OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) Thermal Derating Curves 2.5 2 1.5 1 0.5 0 LFM 0 20 30 40 50 60 70 80 2.5 2 1.5 1 0.5 0 LFM 0 90 20 AMBIENT TEMPERATURE, TA OC 30 40 3 3 OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) 3.5 2.5 2 1.5 1 0.5 0 LFM 0 40 50 70 80 90 80 90 Vo=1.2V 3.5 30 60 AMBIENT TEMPERATURE, TA OC Vo=0.6V 20 50 60 70 80 90 AMBIENT TEMPERATURE, TA OC 2.5 2 1.5 1 0.5 0 LFM 0 20 30 40 50 60 70 AMBIENT TEMPERATURE, TA OC Vo=1.8V Vo=2.5V 3.5 OUTPUT CURRENT, Io (A) 3 2.5 2 1.5 1 0.5 0 LFM 0 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE, TA OC Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 6 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 OUTPUT VOLTAGE VO (V) (20mV/div) OUTPUT VOLTAGE VO (V) (20mV/div) Ripple and Noise Waveforms TIME, t (1μs/div) TIME, t (1μs/div) Vin=5V, Vo=1.2V, Io = Io,max OUTPUT VOLTAGE VO (V) (20mV/div) OUTPUT VOLTAGE VO (V) (20mV/div) Vin=5V, Vo=0.6V, Io = Io,max TIME, t (1μs/div) Vin=5V, Vo=2.5V, Io = Io,max OUTPUT VOLTAGE VO (V) (20mV/div) Vin=5V, Vo=1.8V, Io = Io,max TIME, t (1μs/div) TIME, t (1μs/div) Vin=5V, Vo=3.3V, Io = Io,max Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 7 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 OUTPUT VOLTAGE VO (V) (100mV/div) OUTPUT VOLTAGE VO (V) (200mV/div) OUTPUT CURRENT, IO (A) (1A/div) TIME, t (20μs /div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=1.2V OUTPUT VOLTAGE VO (V) (200mV/div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=0.6V OUTPUT CURRENT, IO (A) (1A/div) TIME, t (20μs /div) TIME, t (20μs /div) TIME, t (20μs /div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=2.5V OUTPUT CURRENT, IO (A) (1A/div) OUTPUT VOLTAGE VO (V) (200mV/div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=1.8V OUTPUT CURRENT, IO (A) (1A/div) OUTPUT CURRENT, IO (A) (1A/div) OUTPUT VOLTAGE VO (V) (100mV/div) Transient Response Waveforms TIME, t (20μs /div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 8 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 ON/OFF VOLTAGE VON/OFF (V) (2V/div) ON/OFF VOLTAGE VON/OFF (V) (2V/div) OUTPUT VOLTAGE VO (V) (500mV/div) OUTPUT VOLTAGE VO (V) (200mV/div) Startup Time TIME, t (1 ms/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=1.2V ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (1V/div) VON/OFF (V) (2V/div) ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (500mV/div) VON/OFF (V) (2V/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=0.8V TIME, t (1 ms/div) TIME, t (1 ms/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=2.5V ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (1V/div) VON/OFF (V) (2V/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=1.8V TIME, t (1 ms/div) TIME, t (1 ms/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 9 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 TIME, t (1 ms/div) TIME, t (1 ms/div) OUTPUT VOLTAGE VO (V) (1V/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=1.2V INPUT VOLTAGE VIN (V) (2V/div) INPUT VOLTAGE VIN (V) (2V/div) OUTPUT VOLTAGE VO (V) (1V/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=0.8V INPUT VOLTAGE VIN (V) (2V/div) INPUT VOLTAGE VIN (V) (2V/div) OUTPUT VOLTAGE VO (V) (200mV/div) OUTPUT VOLTAGE VO (V) (500mV/div) Startup Time (continued) TIME, t (1 ms/div) TIME, t (1 ms/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=2.5V INPUT VOLTAGE VIN (V) (2V/div) OUTPUT VOLTAGE VO (V) (1V/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=1.8V TIME, t (1 ms/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 10 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /3 A Output Bel Power Inc., a subsidiary of Bel Fuse Inc. December 10, 2010 Test Configurations Input Reflected Ripple Current Test Setup. CURRENT PROBE TO OSCILLOSCOPE LTEST VIN(+) BATTERY 1μH CIN CS 1000μF Electrolytic 2x100μF Tantalum E.S.R.