CXA-P1212B-WJL

DC-AC INVERTER UNIT CXA-P1212B-WJL (8W DOUBLE OUTPUT WITH DIMMING FUNCTION) DESCRIPTION: This DC to AC Inverter was developed for many other low LCD Backlight power supply as low profile applications, either for LCD Monitor or Industrial PC. APPLICABLE LCD: 10 to 15 inches double lamp type Lamp Voltage 600V Lamp Current 6mA Lamp Start Up Voltage 1700Vrms (Vin : 12V) FEATURES : PWM dimming type Current Feedback Circuit High Efficiency Low noise with voltage resonant circuit Regulated output current TEMPERATURE & HUMDITY : Operating Temperature Range Storage Temperature Range Humidity -10 °C ~ +70°C -30 °C ~ +85°C 95 %RH max 2 (2) 1 CN1 1 4.85±0.3 2 -ø3.5±0.2 CN2 1 3 3.5±0.3 PS-P1212B-091 9615 MADE IN JAPAN Unit : mm Weight :21.2g typ. 21.5±0.5 CN3 1 CAUTION HIGH VOLTAGE 10.25 ±0.5 107±0.5 153±0.5 14±0.3 4±0.3 8.5MAX No. 1 2 3 Part Discription PCB Connector CN1 Connector CN2; CN3 Qty. 1 1 2 Material UL94V-0 (FR-4 or CEM-3) 53261-0790 SM02(8.0)B-BHS-1 Note t=1.0mm Molex JST Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page ( 1 / 4 ) Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 VER1.3 TO, 29 Apr. 2005 All specification are subject to change without notice. DC-AC INVERTER UNIT CXA-P1212B-WJL (8W DOUBLE OUTPUT WITH DIMMING FUNCTION) Input Side CN1: Pin No. Symbols CN 1-1 Vin CN 1-2 CN1-3 GND CN1-4 CN 1-5 Vrmt Ratings 10.8~13.2V 0V Output Side CN2: Pin No. Symbols Ratings VHIGH1 600Vrms CN 2-1 N.C. CN 2-2 (2V) VLOW1 CN 2-3 Output Side CN3: Pin No. Symbols Ratings VHIGH2 600Vrms CN 3-1 N.C. CN 3-2 (2V) VLOW2 CN 3-3 0~0.4V:OFF / 2.5V~Vin: ON 0V / 5V The warning Vst output 5V in CN 1-6 abnormal circumstances CN 1-7 Vbr / Rbr 0~2.5V / 0~50k Ω ELECTRICAL CHARACTERISTICS : Conditions Items Output Current Input Current Symbols Vin [V] Ta [° C] 12±1.2 12±0.6 12±0.6 12±1.2 12±1.2 12±0.6 -10~70 23±5 -10~70 -10~70 -10~70 -10~70 23±5 RL1 [KΩ] //CL1 [pF] Vbr [V] / RL2 [KΩ ]//CL2 [pF] VR [Ω] 85~95//5 90//5 90//5 85~95//5 85~95//5 ∞ 85~95//5 90//5 85~95//5 ∞ ∞ 85~95//5 85~95//5 0/ 0/ 0/ 0/ 0/ 0 0 0 0 0 Specification Vrmt [V] Min. Typ. Max. 5±0.25 5±0.25 0±0.25 5±0.25 5±0.25 5±0.25 5.3 5.5 35 6.0 6.0 0.8 40 6.7 6.5 1.0 1 45 2.9 2.8 Unit Iout Iin1 Iin2 F mArms Adc mAdc kHz Vrms mArms Frequency Open Circuit Vopen Voltage Dimming Iout1/Iout2 Function 0/0 2.5 / 50k 1500 1700 1.1 1.2 2.0 2.0 Warning Output Vst 12±1.2 -10~70 0/0 5±0.25 4.5 5.0 5.5 Vdc - 0 0.5 DIMMING CHARACTERISTICS (Reference) 7,0 6,0 Iout (mArms) 5,0 4,0 3,0 2,0 1,0 0,0 0,0 0,5 1,0 1,5 2,0 2,5 Vbr (VDC) Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page ( 2 / 4 ) Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 VER1.3 TO, 29 Apr. 2005 All specification are subject to change without notice. DC-AC INVERTER UNIT CXA-P1212B-WJL (8W DOUBLE OUTPUT WITH DIMMING FUNCTION) APPLICATION (for example) Voltage Dimming Type Iin A V Vin 10.8~13.2V CN1-1,2 Vin Q6 T1 1 2 6 C10 CN2-1 Vhigh RL CN1-3,4 GND a 3 4 5 9 CN3-1 Vhigh RL CN1-5 Vrmt SW CN1-7 Vbr Vbr 0~2.5V Vst Vrmt 5V b A CN3-3 Vlow Iout2 A CN1-6 Vst CN2-3 Vlow Iout1 V F 1000:1 PROBE V TEST CIRCUIT Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page ( 3 / 4 ) Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 VER1.3 TO, 29 Apr. 2005 All specification are subject to change without notice. DC-AC INVERTER UNIT CXA-P1212B-WJL (8W DOUBLE OUTPUT WITH DIMMING FUNCTION) Note 1. Note 2. For circuit connection, please prefer to test circuit diagram Please use minimum of 2mm clearance (all directions) between inverter high voltage area and any conductors. Please refer to mechanical drawing for marking of high voltage area. Open voltage (strike voltage) is measured across the transformer secondary winding at no load as the reading at the output connector would be less than the actual value If the start voltage falls below Cold Cathode Tube strike voltage, the CCFL will not light up easily specially at lower ambient temperature. Please review mounting instruction to avoid any abnormal operation due to coupling/leakage capacitance of inverter high voltage area to any surrounding conductor. Please check your lamp characteristic for minimum operational current and set the limit point in your design to avoid flickering and/or abnormal operation. For proper operation of circuit protection (FUSE or IC PROTECTOR), please use minimum of 2A capacity for input power supply. Note 3. Note 4. Note 5. Note 6. Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page ( 4 / 4 ) Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 VER1.3 TO, 29 Apr. 2005 All specification are subject to change without notice.