PRS-1205C

DC-DC Converter UNIT PR Series ( 1 W REGULATED DC-DC CONVERTER ) FEATURES 1000VDC ISOLATION EFFICIENCY UP TO 63% INTERNAL SMD TECHNOLOGY LOW COST NO EXTERNAL COMPONENTS REQUIRED UP TO 1W REGULATED OUTPUT POWER SINGLE IN LINE PACKAGE 100% BURNED IN MTBF > 1,800,000 HOURS OUTPUT SPECIFICATIONS Voltage Setpoint Accuracy Temperature Coefficient Ripple & Noise (20MHz BW) Line Regulation1 Load Regulation 2 INPUT SPECIFICATIONS +/- 2% max +/- 0.03%/ OC Input Voltage Range Input Filter +/- 10% max Capacitor Type 100mVp-p max +/- 0.5% max +/- 0.5% max Current Limit Protection GENERAL SPECIFICATIONS Efficiency 50% min Short Circuit Protection Short Circuit Restart Automatic Isolation Voltage3 Isolation Resistance Switching Frequency Isolation Capacitance MTBF Weight ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Cooling -25 OC to +71 OC -55 C to +125 C O O 1000 VDC min 9 10 ohms min 100 KHz min 80pF max 1,800,000 Hours 2.3g Typ Non-Conductive Plastic 19.6mm*7.1mm*10.2mm Free-Air Convection ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25 O Case Material Case Size C UNLESS OTHERWISE NOTED. 1 2 3 Line Regulation is for High Line to Low Line. Load Regulation is for output load current change from 10% to 100%. For 60 seconds www.Power-Systems.de Page: 1 / 4 Version: 4-Oct-02 DC-DC Converter UNIT PR Series ( 1 W REGULATED DC-DC CONVERTER ) SELECTION GUIDE 1W OUTPUT MODEL NUMBER INPUT (VDC) 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 OUTPUT (VDC) 5 12 15 5 12 15 5 12 15 OUTPUT (mA) 200 84 67 200 84 67 200 84 67 INPUT CURRENT(mA) EFF ISOLATION FULL LOAD NO LOAD 20 32 32 10 38 15 6 6 10 57 61 62 59 53 63 62 63 61 1000 1000 1000 1000 1000 1000 1000 1000 1000 OUTPUT POWER (Watt) 1 1 1 1 1 1 1 1 1 VOLTAGE VOLTAGE CURRENT (%) (VDC) PRS-0505C PRS-0512C PRS-0515C PRS-1205C PRS-1212C PRS-1215C PRS-2405C PRS-2412C PRS-2415C 350 330 322 141 158 132 67 66 68 Note: Other input to output voltages may be available. Please contact factory. www.Power-Systems.de Page: 2 / 4 Version: 4-Oct-02 DC-DC Converter UNIT PR Series ( 1 W REGULATED DC-DC CONVERTER ) MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PIN 1 2 4 5 6 SINGLE +Vin -Vin -Vout NP +Vout SIMPLIFIED SCHEMATIC TYPICAL APPLICATIONS INPUT +Vout +Vin +Vout +Vin OSCILLATOR DRIVER REGULATOR OUTPUT -Vin -Vout DC-DC CONVERTER -Vin -Vout LOAD www.Power-Systems.de Page: 3 / 4 Version: 4-Oct-02 DC-DC Converter UNIT PR Series ( 1 W REGULATED DC-DC CONVERTER ) TYPICAL PERFORMANCE CUREVES DERATING CURVE 1.2 EFFICIENCY VS LOAD EFFICIENCY(%) 70 100 OUTPUT POWER(W) 0.9 0.6 0.3 0.0 -25 0 25 50 80.0 60.0 40.0 20.0 0.0 0 20 40 60 80 100 SAFE OPERATING AREA TA(degree C) % OF RATED LOAD(%) PR SERIES APPLICATION NOTES: EXTERNAL CAPACITANCE REQUIREMENTS: No external capacitance is required for operation of the PR series. To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm from DC to 250KHz is required. External output capacitance is not required for operation, however it is recommended that 10uF tantalum and 0.1uF ceramic capacitance be selected for reduced system noise. Additional output capacitance may be added for increased filtering, but should not exceed 100uF. Negative Outputs: A negative output voltage may be obtained by connecting the +OUT to circuit ground and connecting –OUT as the negative output. FOR MORE INFORMATION CALL: Power Systems – The Power Solution 74360 Ilsfeld-Auenstein ( Germany ) Dörnet 8 E-mail: Info@Power-Systems.de Tel: + 49 / 70 62 / 67 59 – 6 Fax: + 49 / 70 62 / 67 59 -80 Home Page: www.Power-Systems.de www.Power-Systems.de Page: 4 / 4 Version: 4-Oct-02