PS-DA0137-256-B

DC-AC INVERTER UNIT PS-DA0137-256-B(S) (5 W SINGLE OUTPUT) DESCRIPTION : This low profile DC to AC Inverter is developed for single lamps. Optimized for Sharp: LQ085Y3DG06 (Datasheet from 5. Sep. 2007) APPLICABLE LCD: Lamp Voltage 960 Vrms Lamp Current 5.0 mArms Lamp Start Up Voltage 2.400Vrms (Vin : 12 Vdc) FEATURES : Remote ON/OFF Current balance circuit Extra high starting Voltage RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : 0°C ~ +75°C -30°C ~ +85°C 95 %RH max (PRELIMINARY INFORMATION) L x B x H 100 x 30 x 9 mm SM02(8.0)B-BHS-1-TB (JST) Pin 1 Pin 1 Unit : mm Weight :15 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0690 SM02(8.0)B-BHS-1-TB Note t=1m m Molex or equal JST or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstraße 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 25th September 2008 All specifications are subject to change without notice. DC-AC INVERTER UNIT PS-DA0137-256-B(S) (5 W SINGLE OUTPUT) (PRELIMINARY INFORMATION) Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 Symbols Ratings Vin 10.8 ~ 13.2 Vdc Vin 10.8 ~ 13.2 Vdc Vrm t 0 ~ 0.4 = OFF / 2.5 ~ 5.5 = ON Vbr 0 ~ 5.0 Vdc GND GND - Output side CN2 Pin No. CN 2-1 CN 2-2 CN 2-3 Symbols Vhigh N.C. Vlow Ratings 960 Vrm s (5.0 m Arm s ) (GND) ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Frequency Open Circuit Voltage No Load Shotdown Symbols Iout Iout Iin F Vopen Ts d Vin (V) 12±1.2 12±0.6 12±1.2 12±1.2 11.4 12±1.2 Vbr (V) 0.0 5.0 0.0 0.0 0.0 0.0 Tu (°C) 0 0 0 0 0 0 ~ +75 ~ +75 ~ +75 ~ +75 ~ +75 ~ +75 Min. 4.5 50 2.250 Specification Typ. 5.0 25 0.5 2.400 1.0 Max. 5.5 0.55 80 Unit m Arm s % Adc kHz Vrm s s ec Note Dut y 10 0 % wit ho ut lo ad Note 1 : Note 2: Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Open circuit on all lamps for more than 3 sec., will shut the inverter down. TEST CIRCUIT : F Iin V CN1-2 Vrmt 0.4 / 2.5 Vdc F 1000:1 PROBE SW 1 Vopen V ~ Operation of unit Operation Non operation a b Vin 10.8 ~ 13.2 Vdc A CN1-1 SW3 CN2-1 a V b SW1 CN1-3 T1 RL1 CL1 N.C. CN2-2 CN1-4 A ~ Iout1 Vbr 0 ~ 5 Vdc CN1-5 CN1-6 CN2-3 SW4 Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstraße 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 25th September 2008 All specifications are subject to change without notice.