PS-DA0140-01S

DC-AC INVERTER UNIT PS-DA0140-01(S) (8 W SINGLE OUTPUT) DESCRIPTION : This low profile DC to AC Inverter is developed for single lamps Displays. Optimized for Hitachi: TX14D11VM1;TX14D12VM1; TX14D14VM1BAA; TX16D11VM2; TX18D16VM1CAB; TX20D16VM2; TX23D11VM2; TX23D12VM0 (PRELIMINARY INFORMATION) APPLICABLE LCD: Lamp Voltage 1.000 Vrms Lamp Current 3.5 ~ 6.0 mArms Lamp Start Up Voltage 2.400 Vrms (Vin : 12 Vdc) FEATURES : Remote ON/OFF Current balance circuit Extra high starting Voltage Selectable output current by jumper setting (crosslist second page) RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : SM02B-BHSS-1-TB (JST) -10°C ~ +60°C -20°C ~ +85°C 95 %RH max LxBxH SM02(8.0)B-BHS-1-TB (JST) 100 x 30 x 8.5 mm Pin 1 Pin 1 Pin 1 JP3 JP2 JP1 Unit : mm Weight :15 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! ORDER KEY : With order of this Inverter please give the following key. -1: for SM02(8.0)B-BHS-1-TB (JST) -2: for SM02B-BHSS-1-TB (JST) For example PS-DA0140-01-1 (S) Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0690 SM02(8.0)B-BHS-1-TB SM02B-BHSS-1-TB Note t=1m m Molex or equal JST or equal JST or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstraße 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.3, 13th January 2010 All specifications are subject to change without notice. DC-AC INVERTER UNIT PS-DA0140-01(S) (8 W SINGLE OUTPUT) Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 Symbols Ratings Vin 10.8 ~ 13.2 Vdc Vin 10.8 ~ 13.2 Vdc Vrm t 0 ~ 0.4 = OFF / 2.5 ~ 5.0 = ON Vbr 0 ~ 5.0 Vdc GND GND Output Current (± 0.5 mArms) 3.5 m Arm s 4 .0 m Arm s 5 .0 m Arm s 6 .0 m Arm s Pin No. CN 2-1 CN 2-2 CN 2-3 (PRELIMINARY INFORMATION) Output side CN2 Symbols Ratings Vhigh 1.000 Vrm s (6.0 m Arm s ) N.C. Vlow (GND) Crosslist: Displays Jumper Output Current Select Control Jumper Short Short Short Short JP 1 JP 2 JP 3 TX14D11VM1 TX14D12VM1 TX14D14VM1BAA TX16D11VM2 TX18D16VM1CAB TX20D16VM2 TX23D11VM2 TX23D12VM0 JP 1 JP 2 JP 2 JP 2 NO JP NO JP JP 3 JP 3 = JUMP (SHORT J1=Short 1-2, J2=Short 3-4, J3=Short 5-6) ELECTRICAL CHARACTERISTICS : (for 6mArms selection) Conditions Parameters Output Current Output Current Input Current Frequency Open Circuit Voltage No Load Shotdown Symbols Iout Iout Iin F Vopen Tsd Vin (V) 12±1.2 12±0.6 12±1.2 12±1.2 11.4 12±1.2 Vbr (V) 0.0 5.0 0.0 0.0 0.0 0.0 Tu (°C) -10 ~ +60 -10 ~ +60 -10 ~ +60 -10 ~ +60 -10 ~ +60 -10 ~ +60 Min. 5.5 50 2.200 1.0 Specification Typ. 6.0 20 0.67 60 2.400 Max. 6.5 0.75 70 2.700 Unit mArms % Adc kHz Vrms sec Note Duty 100% without load Note 1 : Note 2: Note 3: Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Open circuit on all lamps for more than 3 sec., will shut the inverter down. Before apply any control signal into inverter, please provide Vcc first. Please follow the reversed sequence during power off. Power off control signal first, then power off Vcc. TEST CIRCUIT : F Iin V CN1-2 Vrmt 0.4 / 2.5 Vdc F 1000:1 PROBE Vopen CN1-1 SW3 Vin 10.8 ~ 13.2 Vdc A V ~ SW 1 a b Operation of unit Operation Non operation CN2-1 a V b SW1 CN1-3 T1 RL1 CL1 N.C. CN2-2 CN1-4 A ~ Iout1 Vbr 0 ~ 5 Vdc CN1-5 CN1-6 CN2-3 SW4 Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstraße 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.3, 13th January 2010 All specifications are subject to change without notice.