PS-DA0211-142-BS

DC-AC INVERTER UNIT PS-DA0211-142-B(S) (12 W DUAL OUTPUTS) DESCRIPTION : This low profile DC to AC Inverter is developed for dual lamps. Optimized for Sharp: LQ150X1LG51, LQ150X1LG41 INPUT VOLTAGE: 12 Vdc APPLICABLE LCD: 6.4 to 15 inches double lamp type Lamp Voltage 560 Vrms Lamp Current 2 x 7.5 mArms Lamp Start Up Voltage 1.500 Vrms (Vin : 12 Vdc) FEATURES : Remote ON/OFF Open Lamp Detection Regulated Wide Input range 9.6 ~ 14.4 Vdc Dimming Function RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -10°C ~ +50°C -40°C ~ +85°C 95 %RH max (PRELIMINARY INFORMATION) 140 x 24 x 15 mm PIN 1 CN3 C2 T2 D2 C5 C12 Q2 PIN 1 C3 Q1 3.2Ø X2 D1 1 CAUTION ? ?? ! R2 F1 CAUTION ? ?? T1 C10 REV:1.0 A0 1 C1 Q12 R6 R3 R7 R9 R20 R8 R4 D4 L2 L1 R1 CN2 CN3 CN1 Q11 C4 1 R5 ! R18 CN1 C6 R21 C8 R15 DA0211- D3 CN2 PIN 1 Unit : mm Weight :39,8 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 + CN3 Qty. 1 1 2 Material UL94V-0 (FR-4 or CEM-3) S5B-PH-SM3 SM02(8.0)B-BHS-1-TB Note t=1m m JST or equal JST or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.1.1, 7th July 2008 All specifications are subject to change without notice. DC-AC INVERTER UNIT PS-DA0211-142-B(S) (12 W DUAL OUTPUTS) Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 Symbols Vin GND Vbr GND Vrm t Ratings 9.6 ~ 14.4 Vdc 0 ~ 4.2 Vdc 0 ~ 0.4 = OFF / 3 ~ Vin = ON (PRELIMINARY INFORMATION) Output side CN2 + CN3: Pin No. CN 2-1 CN 2-2 CN 2-3 Symbols VHIGH N.C. VLOW Ratings 560Vrm s GND ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Frequency Open Circuit Voltage No load Shutdow n Symbols Iout Iout Iin F Vopen Ts d Vin (V) 9.6~14.4 9.6~14.4 9.6~14.4 9.6~14.4 9.6~14.4 9.6~14.4 Vbr (V) 0.0 4.2 0.0 0.0 0.0 0.0 Tu (°C) -10 -10 -10 -10 -10 ~ +50 ~ +50 ~ +50 ~ +50 ~ +50 Min. 7.0 2.5 44.5 1.300 1.0 Specification Typ. 7.5 3.0 0.93 52 1.500 Max. 8.0 3.5 1.4 59.5 1.700 Unit m Arm s m Arm s Adc kHz Vrm s s ec wit hout load Note -10 ~ +50 Note 1 : Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : F Iin V CN1-2 F 1000:1 PROBE Vopen CN1-1 SW3 CN2-1 RL1 Vin 12 V A V ~ SW 1 a b CL1 Operation of unit Operation Non operation CN1-3 Vbr 0 ~ 4.2 Vdc CN1-4 T1 CN2-2 SW4 SW5 CN3-1 RL2 A ~ Iout1 Vrmt 0.4 / 3 Vdc a V CL2 b SW1 CN1-5 CN3-2 SW6 A ~ Iout2 Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.1.1, 7th July 2008 All specifications are subject to change without notice.