PS-DA0253-124S

DC-AC INVERTER UNIT PS-DA0253-124(S) (8 W DUAL OUTPUTS) DESCRIPTION : This low profile DC to AC Inverter is developed for dual lamps. Optimized for Sharp: LQ104S1DG21 and LQ121S1LW01 APPLICABLE LCD: 10 to 15 inches dual lamp type Lamp Voltage 466 Vrms Lamp Current 2 x 6.0 mArms Lamp Start Up Voltage 1.700 Vrms (Vin : 12 Vdc) FEATURES : Input Voltage: 9.6 ~ 14.4 Vdc Current Feedback Circuit High Efficiency Low noise with voltage resonant circuit Regulated output current RoHS compliant (S) Coating on request TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -10°C ~ +65°C -30°C ~ +85°C 95 %RH max (PRELIMINARY INFORMATION) 153 x 22 x 10 mm Pin1 Pin1 Unit : mm Weight :40 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0790 SM04(4.0)B-BHS-1-TB Note 1,6 m m Molex or equal JST or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.1, 16th May 2007 All specifications are subject to change without notice. DC-AC INVERTER UNIT PS-DA0253-124(S) (8 W DUAL OUTPUTS) Input side CN1: Pin No. CN 1-1+2 CN 1-3+4 CN 1-5 CN 1-6 CN 1-7 (PRELIMINARY INFORMATION) Output side CN2 Pin No. Symbols Vhigh CN 2-1 Vhigh CN 2-2 N.C. CN 2-3 Vlow CN 2-4 Symbols Vin GND Vrm t N.C. Vbr Ratings 9.6 ~ 14.4 Vdc 0 ~ 0.4 = OFF / 2 .5 ~ Vin = ON 0 ~ 2.5 Vdc Ratings 466 Vrm s (6.0 m Arm s ) 466 Vrm s (6.0 m Arm s ) (GND) ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Frequency Open Circuit Voltage No Load Shutdown Symbols Iout Iout Iin F Vopen Ts d Vin (V) 9.6~14.4 9.6~14.4 9.6~14.4 9.6~14.4 10.8 9.6~14.4 Vbr (V) 0.0 2.5 0.0 0.0 0.0 0.0 Tu (°C) -10 -10 -10 -10 -10 -10 ~ +65 ~ +65 ~ +65 ~ +65 ~ +65 ~ +65 Min. 5.5 1.5 35 1.500 Specification Typ. 6.0 2.0 0.75 40 1.700 1.0 Max. 6.5 2.5 1.0 45 Unit m Arm s m Arm s Adc kHz Vrm s s ec Note Duty 100% wit hout load Note 1 : Note 2 : Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Open circuit on all lamps for more than 3 seconds, will shut the inverter down. TEST CIRCUIT : F Iin V F 1000:1 PROBE Vopen V ~ SW 1 a b Operation of unit Operation Non operation Vin 9.6 ~ 14.4 V A CN1-1 CN1-2 CN1-3 CN2-1 Vrmt 0.4 / 2.5 Vdc V CN1-4 T1 CN2-2 SW3 a b SW1 CN1-5 RL2 CN2-3 N.C. RL1 CL2 CL1 ~ Iout ~ Iout1 2 N.C. CN1-6 CN1-7 Vbr 0 ~ 2.5 Vdc V SW4 CN2-4 A A Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.1, 16th May 2007 All specifications are subject to change without notice.