PS-L0612A-239

DC-AC INVERTER UNIT PS-L0612A-239 (R) (5 W SINGLE OUTPUT WITH DIMMING FUNCTION) DESCRIPTION : This low profile DC to AC Inverter is developed for single lamps, low power LCD back-light. Optimized for Kyocera: TCG057QV1AA-G00 APPLICABLE LCD: Lamp Voltage 685 Vrms Lamp Current 4.0 mArms Lamp Start Up Voltage 1.800 Vrms (Vin : 12 Vdc) FEATURES : Wide operating temperature range Current feedback circuit High efficiency Low noise with voltage resonant circuit Regulated output current RoHS compliant (R) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxBxH -10°C ~ +70°C -30°C ~ +85°C 95 %RH max 96 x 20 x 8 mm Pin 1 Pin 1 Unit : mm Weight :40 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0590 SM02(8.0)B-BHSS-1-TB Output side CN2: Pin No. Symbols VHIGH1 CN 2-1 N.C. CN 2-2 VLOW CN 2-3 Note t=1m m Molex or equal JST or equal Input side CN1: Pin No. Symbols Ratings Vin 9.6 ~ 15.0 Vdc CN 1-1 GND CN 1-2 Vrm t 0 ~ 0.5 = OFF / 5.0 ~ 15.0 = ON CN 1-3 Vbr 0 ~ 3 Vdc CN 1-4 For an int ernal circuit use. Don´t connect N.C CN 1-5 Ratings 685 Vrm s (4.0m Arm s ) 0Vdc Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 8th August 2007 All specifications are subject to change without notice. DC-AC INVERTER UNIT PS-L0612A-239 (R) (5 W SINGLE OUTPUT WITH DIMMING FUNCTION) ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Frequency Open Circuit Voltage Symbols Iout Iout Iin F Vopen Vin (V) 9.6 ~ 15 9.6 ~ 15 12.0 9.6 ~ 15 9.6 ~ 15 Vbr (V) 0.0 3.0 0.0 0.0 0.0 Tu (°C) -10 -10 -10 -10 -10 ~ +70 ~ +70 ~ +70 ~ +70 ~ +70 Min. 3.5 2.0 52 1.500 Specification Typ. 4.0 2.5 0.4 60 1.800 Max. 4.5 3.0 0.65 68 Unit m Arm s m Arm s Adc kHz Vrm s Note Note 1 : Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : SW 1 a b Operation of unit Operation Non operation Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 8th August 2007 All specifications are subject to change without notice.