PS-LD0101-1-150

厂商：
POWER-SYSTEMS
封装：
描述：
PS-LD0101-1-150 - LED-CONVERTER UNIT 9 W - Power Systems GmbH+Co.KG

数据手册：

下载PS-LD0101-1-150.pdf

立即购买

详情介绍
数据手册
价格&库存

PS-LD0101-1-150 数据手册

LED-CONVERTER UNIT PS-LD0101-x-yyy(S) (9 W) DESCRIPTION : This low profile LED-Converter is developed for max. 1 LED-line APPLICABLE: 1 LED line Pout LED Voltage Lamp Current Input Voltage FEATURES : Independent Open LED Detection Voltage or Ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide Input Voltage Range RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity (PRELIMINARY INFORMATION) max. 9 Watt max. 35V max. 300 mAdc 10.8 ~ 13.2 Vdc Connector style -20°C ~ +70°C -20°C ~ +85°C 95 %RH max DIMENSIONS : LxWxH 64 x 32 x 10.5 mm Weight :5 (g) typ. Tolerance: ±0.3mm Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 53261-0590 Note t=1.0m m Molex Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.387, 21st May 2010 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0101-x-yyy(S) (9 W) (PRELIMINARY INFORMATION) Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 CN 1-8 Symbols Ratings Vin 10.8 ~ 13.2 Vdc Vin 10.8 ~ 13.2 Vdc Vrm t 0 ~ 0.8 = OFF / 2.5 ~ 5.0 = ON Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH Vbr 0.0 ~ 5.0 (5V=low brightnes s ) GND GND GND - Output side CN2 Pin No. CN 2-1 CN 2-2 CN 2-3 CN 2-4 CN 2-5 Symbols Ratings RTN1 (-) LED STRING 1 RETURN RTN1 (-) LED STRING 1 RETURN NC Vhigh (+) 35 Vdc Vhigh (+) 35 Vdc Output Current Select Control Jumper Break Break Break Break Break JP 1 JP 2 JP 3 JP 4 JP 5 Output Current +10 mA +20 mA +40 mA +80 mA +120 mA Example: 30mA (Output Current Min.) + 10mA (JP1) = 40mA 30mA (Output Current Min.) + 80mA (JP4) = 110mA JP1 ~ JP5 OPEN = 300mA For more information, please visit our web-site. ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Open Load Shutdow n Output Pow er Symbols Iout Im in Iin Vbias Pout Vin (V) 10.8 10.8 10.8 10.8 10.8 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 Vbr (V) 0 5 0 0 0 Tu (°C) -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 Min. TBD 0.03 TBD Specification Typ. 30 25 35 9 Max. TBD 0.5 TBD Unit m Adc % Adc Vdc Watt Note Dut y 100 % d ut y cycle Note 1 : Note 2 : Note 3: Note 4 : Note 5 : Do not use analog dimming function and external PWM for dimming at the same time. Pin terminal style converters have Molex connectors mounted. Above output current is the default value. Correct output current is to be selected by user and under his sole responsibility. Exceeding currents will damage the LED backlight. External PWM-signal is LOW active. If using external PWM for dimming, please connect Pin CN1-5 to GND. Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.387, 21st May 2010 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0101-x-yyy(S) (9 W) (PRELIMINARY INFORMATION) TEST CIRCUIT : ORDER KEY : PS-LD0101-x-yyy With order of this converter please give the following key: -x to be replaced by: -1 for connectors -2 for Pin-Terminal in case of quantity orders (300+ pcs), the proper current selection can be ordered: -yyy to be replaced by: three digit value for output current per LED line (from 030 to 300 including) Attention: * if no value is mentioned, 30 mA output current per LED line will be set as default * a selection of incorrect LED current may decrease lifetime or destroy the backlight * orders for preconfigured converters can’t be cancelled Examples: PS-LD0101-1-040 (S) 40 mA output current PCB with connectors PS-LD0101-2-150 (S) 150 mA output current PCB with Pin-Terminal CABLES : for input: 500 mm, stripped and tinned ends, order key for output: 500 mm, stripped and tinned ends, order key Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (3) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.387, 21st May 2010 All specifications are subject to change without notice.

下载 PDF

PS-LD0101-1-150

1. 物料型号： - 型号：PS-LD0101-x-yyy(S) (9 W) - 其中“x”代表连接器类型，1代表带连接器，2代表针端子。 - “yyy”代表LED线的输出电流，范围从030到300mA。

2. 器件简介： - 这是一个低轮廓的LED转换器，适用于最大1个LED线，最大9瓦特。 - 输出LED电压最大35V，灯具电流最大300mA。 - 输入电压范围为10.8至13.2Vdc。

3. 引脚分配： - CN1（输入侧）： - CN1-1和CN1-2：Vin，输入电压10.8~13.2Vdc。 - CN1-3：Vrmt，0~0.8Vdc为关闭/2.5~5.0Vdc为开启。 - CN1-4：Ext. PWM，0~0.5Vdc为低/2.5~5Vdc为高。 - CN1-5：Vbr，0.0~5.0Vdc（5V对应低亮度）。 - CN1-6、CN1-7、CN1-8：GND。 - CN2（输出侧）： - CN2-1和CN2-2：RTN1（-）LED STRING 1 RETURN。 - CN2-3：NC（无连接）。 - CN2-4和CN2-5：Vhigh(+)，35Vdc。

4. 参数特性： - 独立开启LED检测电压或外部PWM调光，1000:1调光比。 - 远程ON/OFF控制，宽输入电压范围，RoHS合规。

5. 功能详解： - 提供了详细的电气特性表，包括输入电压、输出电流、输入电流、空载关闭电压和输出功率等参数。

6. 应用信息： - 适用于最大1个LED线，最大9瓦特的应用场景。 - 操作温度范围为-20°C至+70°C，存储温度范围为-20°C至+85°C，湿度最大95%RH。

7. 封装信息： - 尺寸：64 x 32 x 10.5 mm。 - 重量：5克，公差±0.3mm。 - 注意事项：如果安装底座不绝缘，请使用塑料螺丝。

PS-LD0101-1-150 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“PS-LD0101-1-150”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

PS-LD0101-1-150

相关技术文章