PS-LD0301-031

LED-CONVERTER UNIT PS-LD0301-031(S) DESCRIPTION : This low profile LED-Converter is developed for max. 3 LED-lines Optimized for AUO: G150XG01 V.2 19.Nov. 08 APPLICABLE: 1~3 LED lines (Serial Mode) Pout max. 7W LED Voltage max. 30Vdc Lamp Current max. 80mAdc FEATURES : Internal Open LED Detection for every Line Voltage or ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide Input Voltage Range RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity -10°C ~ +65°C -20°C ~ +85°C 95 %RH max (PRELIMINARY INFORMATION) DIMENSIONS : LxWxH 64 x 32 x 6.5 mm Weight :8 (g) typ. Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN3 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 / PBD 53261-0690 / PBD Note t=1.0mm Molex Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 17th April 2009 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0301-031(S) Input side CN1: Pin No. Symbols Ratings Vin 4.75 ~ 13.2 Vdc CN 1-1 Vin 4.75 ~ 13.2 Vdc CN 1-2 Vrm t 0 ~ 1.5 = OFF / 2.5 ~ Vin = ON CN 1-3 Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH CN 1-4 Vbr 0.0 ~ 5.0 (5V=low brightnes s ) CN 1-5 GND CN 1-6 GND CN 1-7 GND CN 1-8 ELECTRICAL CHARACTERISTICS : (PRELIMINARY INFORMATION) Output side Pin No. CN 3-1 CN 3-2 CN 3-3 CN 3-4 CN 3-5 CN 3-6 CN3: Symbols RTN1(-) RTN2(-) RTN3(-) Vhigh(+) Vhigh(+) Vhigh(+) Ratings LED LINE 1 RETURN LED LINE 2 RETURN LED LINE 3 RETURN 30Vdc (80m Arm s ) 30Vdc (80m Arm s ) 30Vdc (80m Arm s ) Conditions Parameters Output Current Output Current Input Current Open Load Shutdown PW M Frequency Output Power Output Power Output Power Output Power Note 1 : Note 2 : Note 3 : Specification Min. TBD TBD 150 TBD TBD TBD TBD Typ. 80 10 1.0 28 TBD TBD TBD TBD Max. TBD TBD 300 TBD TBD TBD TBD Unit m Adc % Adc Vdc Hz Watt Watt Watt Watt Note Dut y 100 % max current , d uty cycle *B y 12V d c Symbols Iout Im in Iin Vbias f(PWM) Pout Pout Pout Pout Vin (V) 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 Vbr (V) Tu (°C) 0 5 0 0 0 0 0 0 0 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 -10~+65 Tu: -20~+50 degC Tu: -20~+70 degC For o ne line For o ne line Do not use analog dimming function and external PWM for dimming at the same time. Pin terminal style converters have Molex connectors mounted. External PWM-signal is Low active. TEST CIRCUIT : Connect Vbr to Ground while using ext. PWM dimming. CABLES : For input: For output: 500 mm, stripped and tinned ends, order key < input cable # 13> with 300mm length or with 90mm length Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0, 17th April 2009 All specifications are subject to change without notice.