PS-LD0301-2

LED-CONVERTER UNIT PS-LD0301-x(S) DESCRIPTION : This low profile LED-Converter is developed for max. 3 LED-lines Optimized for Sharp: LQ104V1DG62 APPLICABLE: 1~3 LED lines (Serial Mode) Pout max. 7W LED Voltage max. 25Vdc Lamp Current max. 80mAdc FEATURES : Internal Open LED Detection for every Line Voltage or ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide Input Voltage Range RoHS compliant (S) Connector style (PRELIMINARY INFORMATION) Pin-terminal style TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity -20°C ~ +70°C -20°C ~ +85°C 95 %RH max DIMENSIONS : LxWxH 64 x 32 x 6.5 mm Weight :8 (g) typ. Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN3 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 / PBD 53261-0690 / PBD Note t=1.0mm Molex Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.1.5, 02nd April 2009 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0301-x(S) Input side CN1/CN2: Pin No. Symbols Ratings Vin 4.75 ~ 13.2 Vdc CN 1-1 Vin 4.75 ~ 13.2 Vdc CN 1-2 Vrm t 0 ~ 1.5 = OFF / 2.5 ~ Vin = ON CN 1-3 Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH CN 1-4 Vbr 0.0 ~ 5.0 (5V=low brightnes s ) CN 1-5 GND CN 1-6 GND CN 1-7 GND CN 1-8 (PRELIMINARY INFORMATION) Output side CN3 / CN4: Pin No. Symbols RTN1(-) CN 3-1 RTN2(-) CN 3-2 RTN3(-) CN 3-3 Vhigh(+) CN 3-4 Vhigh(+) CN 3-5 Vhigh(+) CN 3-6 Ratings LED LINE 1 RETURN LED LINE 2 RETURN LED LINE 3 RETURN TBD TBD TBD ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Open Load Shutdown PW M Frequency Output Power Output Power Output Power Output Power Note 1 : Note 2 : Note 3 : Note 4 : Specification Tu (°C) -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+50 -20~+70 Min. TBD TBD 150 TBD TBD TBD TBD Typ. 80 10 0.8* 28 TBD TBD TBD TBD Max. TBD TBD 300 TBD TBD TBD TBD Unit m Adc % Adc Vdc Hz Watt Watt Watt Watt Note Dut y 100 % max current , d uty cycle *B y 12V d c Symbols Iout Im in Iin Vbias f(PWM) Pout Pout Pout Pout Vin (V) 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 Vbr (V) 0 5 0 0 0 0 0 0 0 Tu: -20~+50 degC Tu: -20~+70 degC For o ne line For o ne line Do not use analog dimming function and external PWM for dimming at the same time. Pin terminal style converters have Molex connectors mounted. External PWM-signal is Low active. In case customer do not connect all output, please ask factory. TEST CIRCUIT : Vin 4. 75 ~ 13.2 Vdc A Iin V CN1-1 CN2-4 CN1-2 CN2-5 D1 D1 D1 Vrmt 1. 5 / 2. 5 Vdc V a CN1-3 CN2-6 D2 D2 D2 b SW1 Ext. PWM 0. 0 ~ Vin CN1-4 SW2 Dx Dx Dx c Vbr 0. 0 ~ 5. 0 Vdc CN1-5 SW3 CN1-6 CN2-2 CN2-1 CN1-7 Connect Vbr to Ground while using ext. PWM dimming. CN1-8 CN2-3 Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.1.5, 02nd April 2009 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0301-x(S) ORDER KEY : PS-LD0301-x With order of this converter please give the following key: -x to be replaced by: -1 for connectors -2 for Pin-Terminal (PRELIMINARY INFORMATION) Examples: PS-LD0301-1 (S) PCB with connectors PS-LD0301-2 (S) PCB with Pin-Terminal CABLES : For input: For output: 500 mm, stripped and tinned ends, order key 500 mm, stripped and tinned ends, order key , or for Sharp LQ104V1DG62: matching connectors, 300 mm, order key Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (3) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.1.5, 02nd April 2009 All specifications are subject to change without notice.