PS-LD0602-021-B

LED-CONVERTER UNIT PS-LD0602-021-B(S) (3 W) DESCRIPTION : This low profile LED-Converter is developed for Sharp: LQ057Q3DG02 APPLICABLE: 1~6 LED lines (Serial Mode) Pout max. 0,9 Watt per line, total max. 3 Watt LED Voltage max. 30V Lamp Current max. 20 mAdc per line FEATURES : Internal Open LED Detection for every Line Voltage or ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Wide Input Voltage Range RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity Connector style (PRELIMINARY INFORMATION) -20°C ~ +70°C -20°C ~ +85°C 95 %RH max DIMENSIONS : LxWxH 64 x 32 x 6.5 mm Weight :5 (g) typ. Pin terminal length may differ Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN3 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0890 53261-0790 Note t=1.0mm Molex Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0 2nd February 2009 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0602-021-B(S) (3 W) Input side CN1/CN2: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 CN 1-6 CN 1-7 CN 1-8 Symbols Ratings Vin 4.75 ~ 13.2 Vdc Vin 4.75 ~ 13.2 Vdc Vrm t 0 ~ 0.8 = OFF / 2.5 ~ Vin = ON Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH Vbr 0.0 ~ 5.0 (5V=low brightnes s ) GND GND GND Pin No. CN 3-1 CN 3-2 CN 3-3 CN 3-4 CN 3-5 CN 3-6 CN 3-7 (PRELIMINARY INFORMATION) Output side CN3 / CN4: Symbols Ratings RTN6 (-) LED LINE 6 RETURN RTN5 (-) LED LINE 5 RETURN RTN4 (-) LED LINE 4 RETURN RTN3 (-) LED LINE 3 RETURN RTN2 (-) LED LINE 2 RETURN RTN1 (-) LED LINE 1 RETURN Vhigh (+) max 30 Vdc (max 30 mAdc) ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Open Load Shutdow n PW M Frequency Output Pow er Output Pow er Output Pow er Output Pow er Symbols Iout Im in Iin Vbias f(PWM) Pout Pout Pout Pout Vin (V) 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 Vbr (V) 0 5 0 0 0 0 0 0 0 Tu (°C) -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+70 -20~+50 -20~+70 Min. 18 0.06 150 TBD TBD TBD TBD Specification Typ. 20 10 30 3 1.9 0.9 0.6 Max. 22 0.3 300 TBD TBD TBD TBD Unit m Adc % Adc Vdc Hz Watt Watt Watt Watt Note Dut y 10 0% max current , dut y cycle Tu: -20 ~+50d egC Tu: -20 ~+70d egC For one line For one line DERATING: DC 5V Input DC 12V Input 3,4 3,2 3 2,8 2,6 2,4 2,2 2 1,8 1,6 1,4 1,2 1 50 55 60 65 70 75 80 AMBIENT TEMP. Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) OUTPUT WATT Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0 2nd February 2009 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LD0602-021-B(S) (3 W) TEST CIRCUIT : Connect Vbr to Ground while using ext. PWM dimming. (PRELIMINARY INFORMATION) Vin 4. 75 ~ 13. 2 Vdc A Iin V CN1-1 CN2-7 D1 D1 CN1-2 Vrmt 1. 5 / 2. 5 Vdc a V b SW1 CN1-3 D2 D2 Ext. PWM 0. 0 ~ Vin CN1-4 SW2 D6 D6 c Vbr 0. 0 ~ 5. 0 Vdc CN1-5 SW3 CN1-6 CN1-7 CN1-8 CN2-6 CN2-1 A ~ A ~ Note 1 : Note 2 : Note 3: Do not use analog dimming function and external PWM for dimming at the same time. External PWM-signal is LOW active. Do not use output 1 in case you have less outputs lanes connected. Examples. Single lane display please connect the LED lane on output 2 or 3… but not output 1. CABLES : for input: 500 mm, stripped and tinned ends, order key for output: 500 mm, stripped and tinned ends, order key Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (3) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0 2nd February 2009 All specifications are subject to change without notice.