PS-LPL0801-01

LED-CONVERTER UNIT PS-LPL0801-01(S) (9 W) DESCRIPTION : This low profile LED-Converter is developed for max. 8 LED-lines APPLICABLE: 1~8 LED lines (Serial Mode) Pout max. 1,125 Watt per line, total max. 9 Watt LED Voltage max. 40V Lamp Current 15 to 240mA programmable FEATURES : Ext. PWM Dimming 1000:1 dimming ratio with external PWM Remote ON / OFF Programmable LED current RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity (PRELIMINARY INFORMATION) -10°C ~ +60°C -20°C ~ +85°C 95 %RH max DIMENSIONS : LxWxH 64 x 32 x 9 mm Weight :8 (g) typ. Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-1090 53261-1090 Note t=1.0mm Molex Molex Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.1, 22nd March 2010 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LPL0801-01(S) (9 W) Input side CN1 Pin No. Symbols Ratings Vin 10.8 ~ 13.2 Vdc CN 1-1 Vin 10.8 ~ 13.2 Vdc CN 1-2 Vrmt 0 ~ 0.8 = OFF / 2.5 ~ 5.5 = ON CN 1-3 CN 1-4 Ext. PWM 0 ~ 0.5 = LOW / 2.5 ~ 5 = HIGH (activ) Adj 1 CN 1-5 Adj 2 CN 1-6 Adj 3 CN 1-7 Adj 4 CN 1-8 CN 1-9 GND CN 1-10 (PRELIMINARY INFORMATION) Output side CN2: Pin No. CN2-1 CN2-2 CN2-3 CN2-4 CN2-5 CN2-6 CN2-7 CN2-8 CN2-9 Symbols RTN1(-) RTN2 (-) RTN3 (-) RTN4 (-) RTN5 (-) RTN6 (-) Ratings LED LINE 1 RETURN LED LINE 2 RETURN LED LINE 3 RETURN LED LINE 4 RETURN LED LINE 5 RETURN LED LINE 6 RETURN LED LINE 7 RETURN LED LINE 8 RETURN max. 40 Vdc max. 40 Vdc RTN7 (-) RTN8 (-) Vhigh (+) GND - CN2-10 Vhigh (+) CURRENT SELECTION: Output Current Select Control Connection Adj 1 Adj 2 Adj 3 Adj 4 GND GND GND GND Output Current +1 mA +2 mA Example: 15mA (Output Current Min.) + 1mA (Adj1 to GND) = 16mA 15mA (Output Current Min.) + 8mA (Adj4 to GND) = 23mA Adj1 ~ Adj4 OPEN = 15mA X X X X +4 mA +8 mA ELECTRICAL CHARACTERISTICS : Conditions Parameters Output Current Output Current Input Current Open Load Shutdown PWM Frequency Output Power Output Power Symbols Iout Imin Iin Vbias f(PWM) Pout Pout Vin (V) 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 10.8 ~ 13.2 Tu (°C) -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 -10~+60 Min. 13 0.4 150 TBD TBD Specification Typ. 15 1 9 1.125 Max. 17 1.8 42 300 TBD TBD Unit mAdc % Adc Vdc Hz Watt Watt Note Duty 100% max current , duty cycle Note 4 Tu: -10~+60degC For one line Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.1, 22nd March 2010 All specifications are subject to change without notice. LED-CONVERTER UNIT PS-LPL0801-01(S) (9 W) TEST CIRCUITS : Vin 9.6 ~ 14.4 Vdc A Iin V CN1-2 CN1-1 CN2-10 D1 D1 CN2-9 CN1-3 D2 D2 (PRELIMINARY INFORMATION) a Vrmt 1.5 / 2.5 Vdc V b SW1 CN1-4 Ext. PWM 0. 0 ~ 5.0 D6 CN1-5 CN1-6 CN1-7 CN1-8 CN1-9 CN1-10 CN 2-8 D6 A ~ CN 2-1 A ~ 15~30mA for each line by 8 LED Raid 30~60mA for each line by 4 LED Raid 60~120mA for each line by 2 LED Raid 120~240mA for each line by 1 LED Raid Note 1 : Note 2 : Note 3 : Note 4 : CABLES : External PWM Signal 2.5~5V (max. 6V) Above output current is the default value. Correct output current is to be selected by user and under his responsibility. Exceeding currents will damage the LED backlight. External PWM-signal is LOW active. For other external PWM frequency, please ask factory. for input: 500 mm, stripped and tinned ends, order key for output: 500 mm, stripped and tinned ends, order key Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (3) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.1, 22nd March 2010 All specifications are subject to change without notice.