PS-M06D05S6-NJ4L

DC-AC INVERTER UNIT PS-M06D05S6-NJ4L(S) (6,5 W DUAL OUTPUTS) DESCRIPTION : This low profile DC to AC Inverter is developed for dual lamps. Please contact us for confirmation regarding compatibility with your display. (PRELIMINARY INFORMATION) APPLICABLE LCD: 6.4 to 12 inches double lamp type Lamp Voltage 500 Vrms Lamp Current 2 x 6.5 mArms Lamp Start Up Voltage 1.500 Vrms (Vin : 5 Vdc) FEATURES : Remote ON/OFF Ext. PWM-Dimming Function RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : 5 ± 0.5 -10°C ~ +60°C -20°C ~ +85°C 95 %RH max LxWxH (2) 105 x 23 x 10 mm 105 ± 0.5 82 ± 0.3 13 ± 0.5 22,5 ± 0.5 15 ± 0.3 CN1 PS-MXXDXX-NJX 29/01/2004 MADE IN GERMANY CAUTION HIGH VOLTAGE CN2 3 10.0MAX Pin 1 2 2 - Ø2.5 ± 0.2 (for M2 screws) 1 (2) Pin 1 Unit : mm Weight :20 (g) typ. High Voltage generation area 60mm Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 Qty. 1 1 1 Material UL94V-0 (FR-4 or CEM-3) S5B-PH-SM3 SM04(4.0)B-BHS-1-TB Note t=1.6m m JST or equal JST or equal Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 Symbols Vin GND Ext. PWM N.C. Vrm t Ratings 5 Vdc 0 ~ 5 Vdc (L activ) 0 / 5 Vdc (H activ) Output side CN2: Pin No. CN 2-1 CN 2-2 CN 2-3 CN 2-4 Symbols Vhigh Vhigh N.C. Vlow Ratings 500 Vrm s (6.5 m Arm s ) 500 Vrm s (6.5 m Arm s ) 0 Vdc Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (1) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.5, 12th February 2010 All specifications are subject to change without notice. DC-AC INVERTER UNIT PS-M06D05S6-NJ4L(S) (6,5 W DUAL OUTPUTS) ELECTRICAL CHARACTERISTICS : Conditions Vrmt Vin (V) Tu (°C) (V) 5±0.05 5±0.25 0 ~ +60 5±0.5 5±0.25 0 ~ +60 5±0.5 5±0.25 0 ~ +60 5±0.5 5±0.25 0 ~ +60 4.75 5±0.25 0 ~ +60 Specification Min. 6.0 5.5 50 1.450 Typ. 6.5 6.5 1.6 60 1.500 Max. 7.0 7.5 2.5 70 Unit m Arm s m Arm s Adc kHz Vrm s Note (PRELIMINARY INFORMATION) Parameters Output Current Output Current Input Current Frequency Open Circuit Voltage Symbols Iout Iout Iin F Vopen Note 1 : Note 2: Note 3: Note 4: Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Remote ON/OFF (CN1-5) has priority and can not be used in combination with External PWM Dimming (CN1-3). When 'Ext.PWM' (CN1-3) is used 'Vrmt' (CN1-5) should not be connected. The external PWM frequency should be in a range of 100 ~ 500 Hz. For other frequency please request. The optimum is normally at 250 Hz, and minimizes the interference disturbances of the vertical sync. frequency. Please contact us for 24V input voltage. F Iin V CN1-2 T1 1000:1 PROBE TEST CIRCUIT : Vin 5V A F SW 1 Vopen V ~ Operation of unit Operation Non operation a b CN1-1 SW3 CN2-1 SW4 CN2-2 CN1-3 Ext. PWM* 0~5V RL2 A RL1 CL2 CL1 NC CN1-4 ~ Iout ~ Iout1 2 SW5 CN2-4 A Vrmt 2.5 Vdc ~ Vin a V b SW1 CN1-5 *) Only active when Vrmt is 0 Vdc or floating EXTERNAL PWM-DIMMING ( Remote ON / OFF Detailed Circuit Diagram ): Power Systems – The Power Solution Web: Email: www.Power-Systems.de Info@Power-Systems.de Page (2) Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Version 1.0.5, 12th February 2010 All specifications are subject to change without notice.