4030

MODULES 4000 Series 10W-33KV SINGLE OUTPUT DC/DC INDUSTRIAL Features • • • • • • • 0 to 100% adjustability. Voltage programmable. Voltage monitor. Remote on/off control. EMI/RFI shielding. Short circuit, reverse polarity protection. Arc protection. Specifications INPUT Voltage OUTPUT Power Voltage Current Ripple Analog control Voltage monitor On/Off control Reference output ENVIRONMENTAL Operating temperature GENERAL Dimensions Weight Packaging Case material Input connector Molex pins High voltage leads OPTIONS Negative output voltage Put “N” after model (eg 4300N). 104 x 78.7 x 35.56 mm (4010 to 4200). 104 x 91.4 x 35.56 mm (4300 to 4330). 675g. Fully encapsulated. Black anodised aluminum. Molex 09-50-3071 (supplied). 08-50-0106 (supplied). 30KV 22AWG (4010 to 4200). 40KV 20AWG (4300 to 4330). –10°C to +60°C. 10W. See table. See table. See table. 0 to 10 Volts = 0 to 100% output. 0 to 10 Volts = 0 to 100% output.. On = 0 Volts or N.C. Off = 5 Volts 10 Volts (±0.5%). +24Vdc (+20% to -5%). Selection Tables MODEL NUMBER OUTPUT VOLTAGE OUTPUT*1 RIPPLE CURRENT 4010 4020 4030 4050 4070 4100 4120 4150 4200 4300*2 4330*2 0 to 1,000V 0 to 2,000V 0 to 3,000V 0 to 5,000V 0 to 7,000V 0 to 10,000V 0 to 12,000V 0 to 15,000V 0 to 20,000V 0 to 30,000V 0 to 33,000V 10mA 5mA 3.3mA 2mA 1.4mA 1mA 0.8mA 0.67mA 0.5mA 0.33mA 0.30mA 0.1% 0.1% 0.2% 0.1% 0.1% 0.1% 0.1% 0.1% 0.2% 0.4% 0.2% Note: 1. At maximum rated output voltage. 2. No voltage monitor. PIN# 1 2 3 4 5 6 7 FUNCTION On/Off control Ground/case +24Volt input 10 Volt reference output Programming voltage Internal potentiometer Voltage monitor PROGRAMMING VOLTAGE RESISTANCE MANUAL Apply 0-10V to pin 5 for 0-100% output. Connect potentiometer to pin 4 (reference voltage), connect wiper arm to pin 5, and connect potentiometer to the ground. Connect pin 6 to pin 5, turn front panel pot for voltage adjust. 222