PBNH-2424L

OPEN FRAME & ENCLOSED PBNH Series 80W MOBILE CONVERTERS Features • • • • • • Easy to mount and terminate Input/output fully isolated Short circuit protected Thermal protected Low noise High surge currents Specifications INPUT Input Voltage 12VDC (10–16) 24VDC (18–32) 36VDC (30–48) 48VDC (40–64) 110VDC (72–140) MECHANICAL Terminals Dimensions Weight Input and output have 6.3mm push on spade terminals 135x119x46mm 0.6kg OUTPUT Output Voltage Output Current Output Voltage Adjustment Output Power Noise Ripple & Noise Load Regulation Line Regulation See selection table See selection table 10% internal pot Typically 80W continuous, 110 intermittent Below CISPR limit Typically 10mV rms at nominal load and input voltage 5% at nominal input voltage 5% over input range STANDARDS AND APPROVALS C-Tick EMC standards EMI standards AS/NZS CISPR11 Group 1, Class A EN50082-1 EN50081-1 Selection Table MODEL NUMBER PBNH-1212L PBNH-1224L PBNH-1248L PBNH-2412L INPUT DC 12V 12V 12V 24V 24V 24V 24V 36V 36V 48V 48V 48V 110V 110V OUTPUT 13.2V 24V 48V 13.2V 24V 36V 48V 13.2V 24V 13.2V 24V 48V 13.2V 24V 3.0A 1.7A 0.7A 6.0A 3.0A 2.5A 1.5A 6.0A 3.0A 6.0A 3.0A 1.5A 6.0A 3.0A OUT I (PK) 4.0A 2.2A 0.8A 10.0A 4.0A 3.0A 2.0A 8.0A 4.0A 8.0A 4.0A 2.0A 8.0A 4.0A OPERATING Isolation Input and output are electrically isolated from chassis and input is isolated from output Isolation voltage – 1000VDC Approx. 50kHz Typically 80%-85% Reverse input polarity Transorb diode at input Overvoltage protection Short circuit protection Thermal protection Unit will switch off automatically at input over- or undervoltage protection -20°C to 40°C at full load derate linearly to 60°C PBNH-2424L PBNH-2436L PBNH-2448L Switching Frequency Efficiency Protection PBNH-3612L PBNH-3624L PBNH-4812L PBNH-4824L PBNH-4848L PBNH-8012L PBNH-8024L ENVIRONMENTAL Operating Temperature 110